Switch insert electronics 1-channel - Electronic switch Tronic 1704 ES E

Switch insert electronics 1-channel - Electronic switch Tronic 1704 ES E – Jung – 4011377166899: Switch insert electronics 1-channel 1704 ES E Basic element composition, Tronic version, other load type, extension input, can be used with button, can be used with motion detector, can be used with presence detector, can be used with time switch/timer, can be used with radio button, flush-mounted installation type, other material, other material quality, Rated voltage 230V, frequency 50 ... 60Hz, rated current 16A, switching capacity 3 ... 400W, fastening type claw/screw fastening, switch insert electronics 1-channel, with extension input, rated voltage: AC 230 V ~, mains frequency: 50/60 Hz, standby -Power: approx. 0.25 W, power loss: approx. 4 W, switching on by soft start that protects the lamps, electronic short-circuit protection with permanent switch-off after 7 seconds at the latest, electronic over-temperature protection, test mode for functional testing, connected load at 25 °C: incandescent lamps: 20 to 400 W, HV halogen lamps: 20 to 400 W, HV LED lamps: typically 3 to 100 W, compact fluorescent lamps: typically 3 to 100 W, electronic transformers: 20 to 400 W, electronic transformers with LV LED 20 to 100 W, inductive transformers: 20 to 400 VA, inductive transformers with LV LED 20 to 100 VA, when operated with a neutral conductor or with Operation without a neutral conductor in the LED trailing edge operating mode: Connected load for HV LED lamps: typically 3 to 200 W, electronic transformers with LV LEDs: typically 20 to 200 W, ohmic-capacitive: 20 to 400 W, capacitive-inductive: not permitted, ohmic-inductive: 20 to 400 VA, ohmic and HV-LED: typically 3 to 100 W, ohmic and compact fluorescent lamps: typically 3 to 100 W, operation without neutral conductor in the operating mode R, L, C, LED: ohmic- inductive mixed load: maximum 50% resistive load, otherwise incorrect calibration possible, operation without neutral conductor: minimum load 50 W, does not apply to loads with HV LED and compact fluorescent lamps, the neutral conductor must be connected when operating non-dimmable LED lamps, total length Load line: maximum 100 m, conn Connection: Screw terminals, 1 x 0.5 to 4 mm² or 2 x 0.5 to 2.5 mm² (solid and flexible without ferrule) and 1 x 0.5 to 4 mm² or 2 x 0.5 to 1.5 mm² (finely stranded with ferrule), total length of extension line: maximum 100 m, number of extensions: unlimited (extension insert 2-wire item no.: 1720 NE and button), maximum 5 (extension insert 3-wire item no.: 1723 NE), Ambient temperature: - 5 to + 45 °C, for attachments item nos.: ..1700.., ..1700 P.., ..1701.., ..1701 P.., ..1750 D.. , ..1751 BT.., ..1751 PBT.., ..17180.., ..17280.., ..17181.., ..17281.. and DWPM 17360.., for switching lighting