Radio control unit 1 to 10 V - Light control unit for bus system 1-ch FM ST 50 UP

FM ST 50 UP 4011377086883 EAN/GTIN DE 64244154 WEEE

Our best price
£87.35 incl. VAT (£0.00)
£128.71 (-32.13% RRP***)

14-16 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Radio control unit 1 to 10 V FM ST 50 UP bus system radio bus, other bus systems eNet, radio... more
Radio control unit 1 to 10 V - Light control unit for bus system 1-ch FM ST 50 UP – Jung – 4011377086883: Radio control unit 1 to 10 V FM ST 50 UP bus system radio bus, other bus systems eNet, radio bidirectional, mounting type flush-mounted, with bus coupling, with LED display, interface 1-10 V, max. switching current (resistive load) 6A, max. switching capacity 1380W, number of outputs 1, max. control current 50mA, new system function: fully encrypted radio transmission (AES-CCM) from eNet server software version 2.0 Intended use Switching and brightness adjustment of lights with 1-10 V interface Operation with suitable eNet radio transmitters Installation in Device box with dimensions according to DIN 49073 in combination with a suitable cover Installation in a surface-mounted housing or installation adapter (item no. FM-EBG) for false ceilings Product features Switch-on brightness can be saved permanently Minimum brightness can be saved permanently Scene operation possible Status display of the 1-10 V participants via LED status feedback to radio transmitter 1-10 V participant can be switched with the Prog button 1-10 V interface is protected against polarity reversal Can be set with eNet server: Maximum brightness Dimming speed On/off switch-on delay Dimm-up/down ramp Switch-off warning Control locks Permanent on, permanent off Hotel function Follow-up time Additional functions with eNet server: Fully encrypted radio transmission (AES-CCM) from eNet server software version 2.0 Update of the device software Repeater function Read out error memory Nominal voltage: AC 230 V ~, 50/60 Hz Standby power: max. 0.5 W Ambient temperature: -25 ... +70 °C Contact type: µ Control voltage: 0.5 ... 11 V Control current: max. 50 mA Ohmic switching current: 6 A Fluorescent lamps: 3 AX Connected load ohmic load: 1380 W Capacitive load: 690 VA (560 µF) Connection type: Screw terminals Solid: 1 x 0.75 ... 4 mm2 Fine-wire with ferrule: 1 x 0.75 ... 2.5 mm2 Dimensions (Ø x H): 53 x 28 mm Total length of load cable: max. 100 m total length Control line: max. 100 m Radio frequency: 868.0 ... 868.6 MHz Transmission power: max. 20 mW Transmission range in open field: typ. 100 m Receiver category: 2
... more
Bus system KNX no
Bus system KNX radio no
Bus system radio bus yes
Bus system LON no
Bus system Powernet no
Other bus systems eNet
Radio bidirectional yes
Mounting Flush
With bus coupling yes
Extension input no
On-site / manual operation no
With LED display yes
Interface 1-10V yes
Max. Switching current (resistive load) 6A
Max. Switching capacity 1380 W
Number of exits 1
Max. Control current 50mA

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Radio control unit 1 to 10 V - Light control unit for bus system 1-ch FM ST 50 UP"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.