KNX area/line coupler LK2-2

LK2-2 88502 4260049680298 EAN/GTIN

Our best price
£155.64 incl. VAT (£0.00)
£231.50 (-32.77% RRP***)

3-5 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Line coupler 2TE LK2-2 bus system KNX, other bus systems without, mounting type REG, width in... more
KNX area/line coupler LK2-2 – Lingg & Janke – 88502 – 4260049680298: Line coupler 2TE LK2-2 bus system KNX, other bus systems without, mounting type REG, width in modular units 2, can be used as line coupler and area coupler, as line coupler it connects a KNX/EIB line with the main line, as area coupler it connects a main line with an area line, here the respective lines are galvanically separated. The telegrams that pass through the coupler can be determined via a filter table, the main line and the subordinate line are connected via a bus terminal, supply voltage: 29V via EIB, protection class IP 20
... more
Bus system KNX yes
Bus system KNX radio no
Bus system radio bus no
Bus system LON no
Bus system Powernet no
Other bus systems without
Mounting REG
Width in division units 2

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "KNX area/line coupler LK2-2"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.