Duct heater, electric 100x181mm 100mm ERH 10-04

Duct heater, electric 100x181mm 100mm ERH 10-04 – Maico – 0082.0100 – 4012799821007: Electric air heater ERH 10-04 Housing material steel, protection class (IP) IP43, nominal width duct 100mm, nominal height duct 181mm, nominal diameter duct 100mm, length 375mm, width 100mm, height 181mm, electric air heater for ventilation systems. With non-glowing tubular heaters made of stainless steel. Operate with temperature controller ETL/DTL (see accessories). Dirty tubular heaters increase the risk of fire. To prevent this, install air filter TFE. Recommended accessories: duct sensor FL or room sensor FR, air flow monitor LW 9, contactor US 16 T and air filter TFE... . Safety instructions: There is an increased risk of fire if the tubular heaters are dirty. To prevent this, install air filter TFE. Designed in accordance with VDE, the Equipment and Product Safety Act and the relevant EU guidelines. With 2 independently switching temperature limiters. Minimum distance to combustible materials: 150 mm (if less than this, install suitable insulation). Article: ERH 10-04, voltage type: alternating current, rated voltage: 230 V, mains frequency: 50 Hz, IMax: 1.74 A, protection class: IP 43, installation: inside, installation position: horizontal / vertical, housing material: sheet steel, galvanized, Weight: 2 kg, nominal width: 100 mm, width: 100 mm, height: 181 mm, depth: 375 mm, air heater type: electric, heating output: 400 W, suitable for box fans: no, suitable for roof fans: no, suitable for tube fans: yes, Suitable for heat recovery systems: no, Suitable for wall-mounted fans: no, Suitable for recessed wall fans: no, Suitable for residential building fans: no, Suitable for centrifugal fans: no, Suitable for circulation fans: no