Duct heater, electric 160x241mm 160mm ERH 16-2

Maico - ERH 16-2 - Duct heater, electric 160x241mm 160mm ERH 16-2
Photo source: fig. possibly similar
Photo source: fig. possibly similar
ERH 16-2 0082.0102 4012799821021 EAN/GTIN DE 78107228 WEEE

Our best price
£406.15 incl. VAT (£0.00)
£603.84 (-32.74% RRP***)

14-16 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Electric air heater ERH 16-2 Housing material steel, protection class (IP) IP43, nominal width... more
Duct heater, electric 160x241mm 160mm ERH 16-2 – Maico – 0082.0102 – 4012799821021: Electric air heater ERH 16-2 Housing material steel, protection class (IP) IP43, nominal width duct 160mm, nominal height duct 241mm, nominal diameter duct 160mm, length 375mm, width 160mm, height 241mm, electric air heater for ventilation systems. With non-glowing tubular heaters made of stainless steel. Operate with temperature controller ETL/DTL (see accessories). Dirty tubular heaters increase the risk of fire. To prevent this, install air filter TFE. Recommended accessories: FL duct sensor or FR room sensor, air flow monitor LW 9, contactor US 16 T and air filter TFE... Safety instructions: Dirty tubular radiators increase the risk of fire. To prevent this, install air filter TFE. Designed in accordance with VDE, the Equipment and Product Safety Act and the relevant EU guidelines. With 2 independently switching temperature limiters. Minimum distance to combustible materials: 150 mm (if less than this, install suitable insulation). Article: ERH 20-2, voltage type: alternating current, rated voltage: 230 V, mains frequency: 50 Hz, IMax: 9.1 A, protection class: IP 43, installation: inside, installation position: horizontal / vertical, housing material: sheet steel, galvanized, weight: 3.7 kg, nominal width: 200 mm, width: 200 mm, height: 281 mm, depth: 375 mm, air heater type: electric, heating output: 2100 W , Suitable for box fans: no, Suitable for roof fans: no, Suitable for tube fans: yes, Suitable for heat recovery systems: no, Suitable for wall-mounted fans: no, Suitable for recessed wall fans: no, Suitable for residential building fans: no, Suitable for centrifugal fans: no, Suitable for circulation fans: no
... more
Material of the housing Steel
IP protection) IP43
Nominal width Channel 160 mm
Nominal height of duct 241 mm
Nominal duct diameter 160 mm
Length 375 mm
Width 160 mm
Height 241 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Duct heater, electric 160x241mm 160mm ERH 16-2"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.