Exhaust system fan insert - Ventilator for in-house bathrooms ER 60 GVZ

Maico - ER 60 GVZ - Exhaust system fan insert - Ventilator for in-house bathrooms ER 60 GVZ
Photo source: fig. possibly similar
Photo source: fig. possibly similar
ER 60 GVZ 0084.0107 4012799841074 EAN/GTIN DE 78107228 WEEE

Our best price
£154.45 incl. VAT (£0.00)
£372.85 (-58.58% RRP***)

14-16 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Exhaust air system flush-mounted fan insert ER 60 GVZ nominal width 75mm, volume flow 62m³/h,... more
Exhaust system fan insert - Ventilator for in-house bathrooms ER 60 GVZ – Maico – 0084.0107 – 4012799841074: Exhaust air system flush-mounted fan insert ER 60 GVZ nominal width 75mm, volume flow 62m³/h, color white, medium temperature -20 ... 40°C, mounting type flush-mounted, rated voltage 230V, mains frequency 50Hz, composition other, nominal current 0.12A, speed 8501/min, material of the housing plastic, direction axial, protection class (IP) other, width 250mm, height 250mm, depth 150mm, version with base load circuit and delay timer: The device runs in continuous operation at 35 m3/h. Switching to full load with a switch-on delay of approx. 50 seconds. Full load follow-up time approx. 6 minutes. Not speed controllable. Circuit variant: The base load can be switched on or off with an additional switch (see circuit diagrams on the Internet). Fan with cover and G2 filter for installation in flush-mounted housing. For one-room or two-room ventilation with a single fan (exception: version H and GVZC EC). Electrical plug connection for quick installation of the fan in the housing. Hassle-free filter changes without tools. Cover can be rotated by +- 5°, making it possible to compensate if the housing is inserted crookedly. Easy-to-install snap fastening of the fan in the housing. Color traffic white, similar to RAL 9016. All MAICO ER devices comply with protection class IP X5 and can therefore be installed in area 1 according to DIN VDE 0100-701, even with water jets. For details see planning information. Protection class II. The extremely steep characteristic curve shows the high pressure capacity of the ER fans. Robust energy-saving capacitor motor. ER 60 GVZC EC: with energy-saving EC motor. Motor with thermal overload protection. Maintenance-free, with ball bearings closed on both sides. Volume flow characteristic curve and leakage air rate tested by TÜV Bayern eV Leakage air volume flow < 0.01 m3/h. Shaft level difference according to DIN 4109, tested by IAB Oberursel. With VDE mark. Article: ER 60 GVZ, version: base load and delay timer, delivery volume: 35 m3/h / 62 m3/h, speed: 850 1/min / 1250 1/min, air direction: ventilation, speed controllable: no, SEC average: -3 .43 kWh/(m2*a), voltage type: alternating current, rated voltage: 230 V, mains frequency: 50 Hz, power consumption: 10 W / 21 W, IMax: 0.12 A / 0.16 A, protection class: IP X5, mains supply cable : 5 / 1.5 mm2, installation location: wall / ceiling, installation type: flush-mounted, system type: decentralized, material: plastic, color: traffic white, similar to RAL 9016, weight: 1.5 kg, filter class: G2, blow-out direction: sideways, width : 250 mm, height: 250 mm, depth: 150 mm, conveyor temperature at IMax: 40 °C, follow-up time: 6 min, switch-on delay: 50 s, sound pressure level: 26 dB(A) / 36 dB(A) / information in accordance with DIN 18017 -3 with an equivalent absorption area AL = 10 m2, nominal width: 75 mm / 80 mm
... more
Nominal width 75 mm
volume flow 62 m³/h
Colour white
Medium temperature -20..40 °C
Mounting Flush
Rated voltage 230V
Power frequency 50 Hz
Compilation other
Current 0.12 A
Number of revolutions 850 1/min
Material of the housing Plastic
Direction Axial
IP protection) other
Noise 26 dB(A) re 1 pW
Width 250 mm
Height 250 mm
Depth 150 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Exhaust system fan insert - Ventilator for in-house bathrooms ER 60 GVZ"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.