Test box for charging stations - Accessory for battery 320011

Test box for charging stations - Accessory for battery 320011 – Mennekes E-Mobility – 4015394264620: Test box for charging stations 320011 Simulation of vehicle status, charging process status display, connection type 2, hand-held device version, width 225mm, height 390mm, depth 165mm, weight 4000g, test box type F for charging systems for functional testing of charging stations To connect the test box, a test cable generation 2 (with charging plug and charging coupling) to be used. A test cable is not included with the test box, but can be ordered separately. Shapely, robust plastic housing made of AMAPLAST in AMAXX design with carrying handle, sealable, with outer and Internal attachment Degree of protection IP 20 Dimensions 390 x 225 x 165 (HxWxD) Upper part electrogrey RAL 7035 Lower part black hinged on the side with double-threaded cover screws Equipment/safety: Pos.1: 1 SCHUKO socket Pos.2: 1 CEE socket 16A 5p 400V Pos. 1+2: 1 LS switch 16A 3p+NC 1 vehicle charging connector 32A Mode 3 with hinged cover Other installations: 3 rotary switches 3 phase control lights Resistor-diode combination The following tests can be carried out: 1. ON / OFF switch (State A / B) 2 .Simulation of non-gassing and gassing vehicles. Charging with and without ventilation request (State C / D) 3. Error message from the electric vehicle Short circuit between CP and PE (State E) 4. Simulation of an AC load 5. Simulation of a three-phase load. Can be used to control the rotating field 6. Charging plug for connection to a mode 3 charging point 7. Indicator lights for phase control (State A to E = vehicle states according to the standard)