Test box TwInlet type F - Measuring/testing instrument E-Mobility 320013

Test box TwInlet type F - Measuring/testing instrument E-Mobility 320013 – Mennekes E-Mobility – 4015394281535: Test box TwInlet type F 320013 simulation of vehicle status, status display charging, signal output, connection type 1, connection type 2, hand-held device version, width 225mm, height 260mm, depth 165mm, weight 4000g, test box TwInlet type F function check of charging stations, wall boxes and charging cables for connecting the Generation 2 charging cables are to be used in the test box. Type 1 and 2 vehicle inlets are installed in the test box. The charging cables are not included with the test box, but can be ordered separately. Shapely, robust plastic housing made of AMAPLAST in AMAXX design with carrying handle, sealable, with outer and Internal mounting Degree of protection IP 20 Dimensions 260 x 225 x 190 (HxWxD) Upper part electric gray RAL 7035 Lower part black hinged on the side with double-threaded cover screws Equipment/safety: 1 SCHUKO socket 1 LS switch 10 1p+NB 1 vehicle charging connector type 1 20A mode 3 with hinged cover 1 vehicle charging connector type 2 32A mode 3 with hinged lid other installations: 3 rocker switches 1 three-phase measuring relay 1 BNC socket resistance-diode combination The following tests can be carried out: 1. Switch (State A / B) 2. Simulation of non-gassing and gassing Vehicles charging with and without ventilation request State C / D) 3. Error message of the electric vehicle Short circuit between CP and PE (State E) 4. Three-phase measuring relay with signal lights for checking the phases, the clockwise rotating field and the outer conductor voltages against the neutral conductor 5. Checking counters by connection an AC load to the SCHUKO socket 6. BNC socket for connecting an oscilloscope Ch n used to control the CP signal