SpaceLogic KNX coupler DIN rail - KNX Area/line coupler for home automation MTN6500-0101

MTN6500-0101 3606489917876 EAN/GTIN DE 33842582 WEEE

Our best price
£158.25 incl. VAT (£0.00)
£220.55 (-28.25% RRP***)

3-5 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
SpaceLogic KNX coupler DIN rail MTN6500-0101 bus system KNX, other bus systems without, mounting... more
SpaceLogic KNX coupler DIN rail - KNX Area/line coupler for home automation MTN6500-0101 – Merten – 3606489917876: SpaceLogic KNX coupler DIN rail MTN6500-0101 bus system KNX, other bus systems without, mounting type REG, width in division units 1, Spacelogic KNX coupler on DIN rail. For the logical connection and galvanic isolation of lines and areas. The device supports KNX Security. This option can be activated in the ETS. As a secure line coupler, the device enables the forwarding of secured and unsecured communication. In addition, access to the device itself (e.g. for a download) is protected by KNX security. The device has a filter table (8k bytes) and ensures galvanic isolation between the lines. The coupler supports KNX longframes and is compatible with the ETS 5 software. With 2 integrated buttons for test purposes and 3 status LEDs. For mounting on TH35 DIN rails in accordance with EN 60715. The bus is connected via bus connection terminals. KNX software functions - The device can be used as an area/line coupler or as a repeater to form line segments in existing or new KNX systems. The function as a coupler or repeater can be parameterized. Functions as a coupler - Use as an area or line coupler depending on the physical address. Reduction of the bus load through the filter function (filter table). Support full address range (group 0-31) with filter function. The forwarding of individually addressed telegrams (Subline = Mainline, Mainline = Subline) can be parameterized. The forwarding of group telegrams (subline = main line, main line = subline) can be parameterized. Telegram repetitions in the event of transmission errors can be parameterized separately for group telegrams, broadcast telegrams and physically addressed telegrams. The telegram confirmation for group telegrams and physically addressed telegrams can be parameterized separately. Function as a repeater - extending a line into segments. Telegram repetitions in the event of transmission errors can be parameterized separately for group telegrams, broadcast telegrams and physically addressed telegrams. Device width - 1 module = approx. 18 mm. Note - This application requires ETS 5 or higher. Contents - With 2 bus connection terminals and 2 cable covers.
... more
Bus system KNX yes
Bus system KNX radio no
Bus system radio bus no
Bus system LON no
Bus system Powernet no
Other bus systems without
Mounting REG
Width in division units 1

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "SpaceLogic KNX coupler DIN rail - KNX Area/line coupler for home automation MTN6500-0101"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.