Fan timer relay - Timer relay 1,5...30s AC 24V DC 24V LTRk-E12 24AC/DC

Metz - LTRk-E12 24AC/DC - Fan timer relay - Timer relay 1,5...30s AC 24V DC 24V LTRk-E12 24AC/DC
Photo source: fig. possibly similar
Photo source: fig. possibly similar
LTRk-E12 24AC/DC 11028313 4250184121060 EAN/GTIN DE 87494433 WEEE

Our best price
£46.87 incl. VAT (£0.00)
£98.46 (-52.4% RRP***)

14-16 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Fan timer relay LTRk-E12 24AC/DC Design of the electrical connection Screw connection, function... more
Fan timer relay - Timer relay 1,5...30s AC 24V DC 24V LTRk-E12 24AC/DC – Metz – 11028313 – 4250184121060: Fan timer relay LTRk-E12 24AC/DC Design of the electrical connection Screw connection, function with ON-delay, function with OFF-delay, rated control supply voltage Us at AC 50 Hz 24 ... 24V, rated control supply voltage Us at DC 24 ... 24V, type of voltage for actuation AC/DC, time range 1 ,5 ... 30s, number of outputs, delayed, NO contact 2, suitable for DIN rail mounting, width 22.5mm, height 75mm, depth 100mm, the fan timer relay was specially designed to control two-stage motors. ON and OFF delays are separately and infinitely adjustable. It is controlled with a two-stage switch. The motor contactors are controlled with the two mutually locked outputs. How it works: 1. If level 2 is selected directly, level 1 is switched on first for the set start-up time so that the fan can run up to the nominal speed. After that it is activated in stage 2.2. When switching back from level 2 to level 1 or to the OFF position, a switch-off delay is triggered so that the fan can coast down before level 1 is activated.3. If level 1 has already been switched on for at least the set start-up time, the changeover to level 2 takes place immediately. When switching from level 1 to 2, the interruption must not exceed 250 ms. If this time is exceeded, the procedure is as described in point 1.
... more
Function delayed yes
Back-delayed function yes
Remote control possible no
Suitable as remote control no
Rated control supply voltage Us at DC 24V
Voltage type for actuation AC/DC
Time range 1.5..30 s
Number of outputs, delayed, normally open 2
With semiconductor output no
Suitable for DIN rail mounting yes
Suitable for front mounting no
Width 22.5 mm
Height 75 mm
Depth 100 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Fan timer relay - Timer relay 1,5...30s AC 24V DC 24V LTRk-E12 24AC/DC"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.