Analog encoder KMA-R-F8 - Signal converter 11073001

Analog encoder KMA-R-F8 - Signal converter 11073001 – Metz – 4251394607665: Analog value transmitter KMA-R-F8 11073001 Galvanic isolation without, rated current consumption 19mA, The analog value transmitter is used for the manual control variable setting, e.g. B. for mixing flaps, valve positions, temperature values, etc. The module can be controlled by two operating modes, which are set using the three-stage switch (ON, OFF, AUTO) on the front. The switch position is reported back via the external control contact terminals B1 and B2. Switch position ON: The manipulated variable can be set with the potentiometer on the front. The 0 to 10 V output signal is available at terminal Y. Switch position AUTO: The manipulated variable is switched through to the manipulated variable output Y via terminal YR without being changed. , connection with spring-loaded terminals (push-in), setpoint adjuster, manual control level with feedback, LED brightness proportional to the manipulated variable, protected against reverse voltage