Media Converter 10/100/1000T/1000SX MS400240

Media Converter 10/100/1000T/1000SX MS400240 – Microsens: Media converter 10/100/1000T/1000SX MS400240 Ethernet, Fast Ethernet, Gigabit Ethernet, number of 10 Mbps BNC ports 0, number of 10 Mbps AUI ports 0, number of 10 Mbps ST ports 0, number of 10 Mbps SC- Ports 0, number of 10 Mbps VF-45 ports 0, number of 10 Mbps MTRJ ports 0, number of 10 Mbps RJ45 ports 0, number of 10/100 Mbps RJ45 ports 0, number of 100 Mbps RJ45 ports 0, number of 10/100/1000 Mbps RJ45 ports 1, number of 1000 Mbps RJ45 ports 0, number of 100 Mbps ST ports 0, number of 100 Mbps SC ports 0, number of 100 Mbps VF-45 Ports 0, number of 1000 Mbps SC ports (SX) 1, number of 1000 Mbps SC ports (LX) 0, number of 1000 Mbps LC ports (SX) 0, number of 1000 Mbps LC ports (LX) 0 , Number of 10 Gbps SC ports (SX) 0, Number of 10 Gbps SC ports (LX) 0, Number of 10 Gbps LC ports (SX) 0, Number of 10 Gbps LC ports (LX) 0, Number of GBIC ports (SX) 0, number of GBIC ports (LX) 0, number of mini-GBIC ports (SX) 0, number of mini-GBIC ports (LX) 0, voltage type of supply voltage DC, supply voltage at DC 5 ... 5V, wall/direct mounting possible, single device design, height 26mm, width 70mm, depth 94mm, This Gigabit Ethernet Bridge allows copper-based Ethernet networks to be coupled via fiber optic connections. The fiber optic connection allows very long distances to be bridged and at the same time provides a connection that is not susceptible to interference and is galvanically decoupled. The integrated 10/100/1000 Mbit/s autonegotiation function on the copper interface enables older networks with low data rates to be connected. On the optical side, versions for multimode or monomode fibers are available, as well as a variant with an SFP slot for which a large selection of different SFPs is available. In addition to standard multimode and monomode SFPs for various distances, C/DWDM and bidirectional simplex SFPs are also available. The link transparency and also the switching mode can be configured using DIP switches. Color-coded LEDs indicate the current status of the bridge and can be used to diagnose errors in the network. The RJ-45 connection automatically configures itself to the highest possible transmission speed for 10 MBit/s (10Base-T Ethernet), 100 MBit/s (100Base-TX Fast Ethernet) or 1 GBit/s (1000Base-T). The integrated auto crossover function also detects the occupancy for the connection to a switch or computer. The use of different RJ-45 connection cables is not necessary. In addition to the version for multimode fibers (1000Base-SX), versions for monomode fibers (1000Base-LX) and an SFP variant are also available