Cable extractor control KDS 116 oDibt-Zulass

Cable extractor control KDS 116 oDibt-Zulass – Schabus – 300750 – 4044764000919: Cable extractor control KDS 116 oDibt approval Type of accessories other, By using the cable extractor control KDS 116, an exhaust system can only be used when the window is open and the necessary supply air can flow into the room. A magnetic switch on the window sash monitors whether the window is open or closed and transmits this information to the control unit via a thin cable. This only releases the power supply when the window is tilted or open. Assembly: The control cable is connected to the control unit and the magnetic switch. Ideal for subsequent installation when the control cable with 2 wires has already been installed. The control unit is equipped with a potential-free changeover contact and can therefore be connected to the extractor hood's fan motor supply line so that the extractor hood's lighting works independently of the window position. Second window: The system can be combined with another cable-magnetic switch KMS 098K22 for a second window. At least one window must be open for the exhaust system to be switched on. KDS 116 combined with an integrated switch contact on the window: Many window manufacturers offer windows with an integrated switch contact (opener/closer). The KDS 116 can be easily combined with these window contacts. KDS 116 combined with exhaust gas temperature monitor: As soon as the exhaust gas temperature in the exhaust pipe exceeds 40 degrees, the window must be opened. Exhaust gas temperature monitor ATW 519 for KDS 110/116. Technical data: Operating voltage: 230 V/50-60 Hz, power consumption: approx. 2 W, relay switching capacity: 3500 W/16 A, relay switching capacity: 2000 VA/8 A, control voltage: 18 V, cable length: 6 m (extendable) , functional range: -15 °C/+40 °C, protection class: IP 20, control unit (HxWxD): 51x51x26 mm, magnetic switch (HxWxD): 55x15x18 mm, magnet (HxWxD): 55x15x18 mm, spacer plate (HxWxD): 55x15x5 mm