Cable extractor control - Accessory for cooker hood KDS 210 (4m)

Cable extractor control - Accessory for cooker hood KDS 210 (4m) – Schabus – 300672 – 4044764000612: Cable extractor control KDS 210 (4m) Type of accessories other, By using the cable extractor control KDS 210, an exhaust air system can only be used when the window is open and the necessary supply air can flow into the room. A magnetic switch on the window sash monitors whether the window is open or closed and transmits this information to the control unit via a thin cable. This only releases the power supply when the window is tilted or open. KDS 210 with DIBt approval Z-85.2-14. The control unit is simply plugged between the socket and the power plug of the extractor hood. The power plug fuse prevents the extractor hood's device plug from being changed. The control line is connected to the magnetic switch. Second window: The system can be combined with another cable magnetic switch KMS 098K22 (item no. 300743) for a second window; at least one window must be open so that the exhaust system can be switched on. Existing window contact: If the window manufacturer has already installed a magnetic contact and it is a closer (closer is closed when the window is closed), this can be used for the KDS 210. All you have to do is connect the included 10 kOhm resistor in parallel to the make contact to ensure cable breakage protection. Technical data: Operating voltage: 230 V/50-60 Hz, switching capacity: 1150 VA (700 W)/5 A (3 A), control voltage: 18 V, cable length: 4 m (extendable), functional range: -15 °C/+ 40 °C, protection class: IP 40, control unit (HxWxD): 121x57x46 mm, magnetic switch (HxWxD): 55x31x18 mm, magnet (HxWxD): 55x15x18 mm, spacer plate (HxWxD): 55x15x5 mm