Cable exhaust control 230V AC 50Hz - Accessory for cooker hood KDS 110 mDibt-Zulass

KDS 110 mDibt-Zulass 300740 4044764000636 EAN/GTIN DE 91394868 WEEE

Our best price
£55.75 incl. VAT (£0.00)
£73.98 (-24.64% RRP***)

3-5 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Cable exhaust air control 230V AC 50Hz KDS 110 mDibt approval Type of accessories other, By using... more
Cable exhaust control 230V AC 50Hz - Accessory for cooker hood KDS 110 mDibt-Zulass – Schabus – 300740 – 4044764000636: Cable exhaust air control 230V AC 50Hz KDS 110 mDibt approval Type of accessories other, By using the cable exhaust air control KDS 110, an exhaust air system can only be used when the window is open and the necessary supply air can flow into the room. A magnetic switch on the window sash monitors whether the window is open or closed and transmits this information to the control unit via a thin cable - which only releases the power supply when the window is tilted or opened. KDS 110 with DIBt approval Z-85.2-14, assembly: The control cable is connected to the control unit and the magnetic switch. Ideal for subsequent installation when the control cable with two wires has already been installed. The control unit is equipped with a potential-free changeover contact and can therefore be connected to the extractor hood's fan motor supply line so that the extractor hood's lighting works independently of the window position. Second window (OR): At least one window must be open for the exhaust system to be switched on. For this purpose, the KDS 110 SET is expanded with the cable magnetic switch KMS 098K22 for the second window. Second window (AND): Two windows must be open at the same time for the exhaust system to turn on. Two independent KDS 110 SETs are required for this. The relays of the control devices must be connected in series. KDS 110 combined with exhaust gas temperature monitor: As soon as the exhaust gas temperature in the exhaust pipe exceeds 40 degrees, the window must be opened. Exhaust gas temperature monitor ATW 519 for KDS 110/ 116 Item no. 201753. Technical data: Operating voltage: 230 V AC/50-60 Hz, power consumption: approx. 2 W, relay switching capacity: 1150 VA/5 A, relay switching capacity: 700 W/3 A, control voltage: 18 V, cable length: 6 m (extendable), functional range: -15 °C/+40 °C, protection class: IP 20, control unit (HxWxD): 51x51x26 mm, magnetic switch (HxWxD): 55x15x18 mm, magnet (HxWxD): 55x15x18 mm, spacer plate (HxWxD ): 55x15x5mm
... more
Type of accessories/spare parts other

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Cable exhaust control 230V AC 50Hz - Accessory for cooker hood KDS 110 mDibt-Zulass"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.