Water detector for hazard detection SHT 5000

Water detector for hazard detection SHT 5000 – Schabus – 300744 – 4044764000933: Water detector SHT 5000 Detection type water, mounting type surface, operating voltage 230V, height 55mm, width 80mm, depth 120mm, The water detector SHT 5000 is a powerful multifunctional device for monitoring cellars, flat roofs, cisterns, slurry pits and much more. A water sensor or float switch can be installed on the device per input or several can be connected in parallel. A signal generator is installed for loud alarming and can be switched on or off for each input. 4 LEDs show the alarm status of the inputs, additional. There are 2 setting options for each input. On the one hand, the triggered alarm can be saved and acknowledged by pressing a button; on the other hand, if the water level falls below the alarm, the alarm can be automatically deleted again. Possible uses: pump control, cistern monitoring, fill level monitoring, overflow detection (e.g. slurry pit), monitoring flat roofs, combined with mini float switch also suitable for other liquids (e.g. heating oil, diesel, vegetable oil, lubricating oils, etc.), battery operation in the event of a power failure: The battery operation option is used for The water detector is equipped with a 9 V block battery. In the event of a short power outage, an acoustic alarm is still triggered and via the relay, for example. B. an emergency power control circuit is switched, connection of external devices: Through an integrated. Potential-free relay contact in the device can be used to control a signal generator, a magnetic shut-off valve, a telephone dialer or even a bus system when an alarm is reported. When using the relay plug-in card accessory (item no. 300747), a relay is assigned to each input. This means that a separate additional device can be controlled for each input or a pump control can be implemented. Also ideal in conjunction with the GSM voting device (item no. 200279), which can query 4 signaling contacts. Use with non-conductive liquids: You can also use the SHT 5000 water detector with other liquids that are non-conductive or have dangerous properties. Simply combine the SHT 5000 with our mini float switches. Outdoor use: The SHT 5000 can be manufactured in IP65 upon request for an additional charge. Technical data: Operating voltage: 230 V AC/50 Hz, power consumption: approx. 4 W, sensor connections: up to 4 water sensors, sensor voltage: 2.5 V square wave AC voltage 120 Hz, sensor switching point: RS<80 KOhm, sensor cable length: up to 50 m can be extended with 2x 0.14 mm², relay contact: 1 changeover contact NC/NO (potential-free), switching capacity relay: 8 A/230 V, sound pressure buzzer: IP20: 90 dB (10 cm distance), functional range: -15 °C/ +40 °C, protection class: standard IP20, only for indoor use, on request IP65 for outdoor use, battery (optional): 9 V block battery, dimensions (HxWxD): 80x160x55 mm