Universal touch dimmer 230V AC 0-500VA ETD U2

ETD U2 ETDU29 4046929201100 EAN/GTIN DE 49141360 WEEE

Our best price
£42.20 incl. VAT (£0.00)
£59.94 (-29.6% RRP***)

3-5 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Universal touch dimmer UP 230VAC 0-500VA ETD U2 composition of basic element, push button... more
Universal touch dimmer 230V AC 0-500VA ETD U2 – Schalk – ETDU29 – 4046929201100: Universal touch dimmer UP 230VAC 0-500VA ETD U2 composition of basic element, push button operation, dimming leading edge, dimming trailing edge, load type universal and LED retrofit, extension input, light value memory, can be used with button, can be used with motion detector, can be used with presence detector, can be used with timer/timer, Type of installation flush-mounted, type of attachment other, material plastic, halogen-free, color gray, RAL number (similar) 7035, transparent, rated voltage 230 ... 230V, frequency 50 ... 50Hz, control voltage 230 ... 230V, rated power 0 ... 500VA, connection type screw terminal, core cross-section 0.5 ... 2.5mm², device width 43mm, device height 43mm, device depth 18.5mm, With the electronic universal touch dimmer ETD U2 (UP variant) a wide variety of light sources (LED energy-saving light bulbs, NV Dimming halogen lamps with Tronic or wound transformers, HV halogen lamps). In addition to automatic detection for wound transformers (dimming type auto), the dimming type can also be set manually to leading or trailing edge (possibly necessary for lamps with electronic ballasts). A special ESL dimming mode also creates an ignition and warm-up phase for compact fluorescent lamps (energy-saving lamps). Due to the compact housing dimensions, the ETD U2 can be installed directly in the installation sockets behind a button of any switch range, and is therefore equally suitable for new installations as well as a maintenance-free replacement for existing (defective) rotary or touch dimmers. Due to the integrated base load, it is suitable for operation on a mains field circuit breaker. Also available as a functionally identical REB variant ETD 2E, dimensions: 43x43x18.5mm, 230V AC, 0-500W
... more
Compilation Base element
Of operation Push button
Dimming Phase control yes
Dimming Phase section yes
Series dimmer no
Load type universal and LED retrofit
Extension input yes
Light value memory yes
Suitable with button yes
Usable with motion detector yes
Suitable with presence detector yes
Usable with timer / timer yes
Mounting Flush
Mounting other
Material Plastic
Halogen free yes
Colour gray
RAL number (similar) 7035
Transparent yes
Nominal voltage 230V
Frequency 50 Hz
Control voltage 230V
Connection Screw terminal
Core cross-section 0.5..2.5 mm²
Device width 43 mm
Device height 43 mm
Device depth 18.5 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Universal touch dimmer 230V AC 0-500VA ETD U2"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.