Light time impulse switch with 3 modes 1 NO contact 16A - Staircase lighting timer 0,25...150min ...

ZS 2 zs2009 4046929201032 EAN/GTIN DE 49141360 WEEE

Our best price
£26.45 incl. VAT (£0.00)
£38.00 (-30.39% RRP***)

3-5 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Light time impulse switch m.3 modes 1S 16A ZS 2 electronic function, DIN rail mounting type,... more
Light time impulse switch with 3 modes 1 NO contact 16A - Staircase lighting timer 0,25...150min ... – Schalk – zs2009 – 4046929201032: Light time impulse switch m.3 modes 1S 16A ZS 2 electronic function, DIN rail mounting type, width in modular units 1, installation depth 55mm, number of contacts as NO contact 1, number of contacts as NC contact 0, number of contacts as changeover contact 0, control voltage 1 253 ... 207V, type of control voltage 1 AC, frequency of control voltage 1 60 ... 50Hz, rated switching current 16A, release delay 0.25 ... 150min, glow lamp current button 20mA, switching type 3- and 4-wire circuit, switch-off warning without, surge function Selectable, back-up switch can be switched on + continuous light + time extension, supply voltage 253 ... 207V, voltage type of the supply voltage AC, max. incandescent lamp load 1000W, max. fluorescent lamp load 250VA, max. fluorescent lamp load (duo circuit) 1000VA, max. fluorescent lamp load (parallel compensated) 1000VA, As a modern light-time impulse switch (current impulse switch), the ZS 2 combines a high degree of comfort, flexibility and a wide range of functions with simple handling ng and operation. By briefly or longer pressing the light button, you can choose between two independently adjustable time ranges. This enables individually configurable short-term / long-term switching in a range from 0.25 to 150 minutes. Pressing the light button again switches off the consumers immediately. Two operating modes enable long-term switching to be blocked, dimensions: 18x55mm, 230V AC - 1 NO contact (potential-free) 16A, tvK/tvL -18/-150min
... more
Function electronic
Mounting DIN rail
Width in division units 1
Depth 55 mm
Number of contacts as normally open 1
Control voltage 1 253..207 V
Control voltage type 1 AC
Frequency of control voltage 1 60..50 Hz
Rated operating current 16 A
Release delay 0.25..150 min
Button glow lamp current 20 mA
Switching 3- and 4-wire circuit
Switch-off without
Surge function selectable yes
Supply voltage 253..207 V
Voltage type of the supply voltage AC
Max. Incandescent lamp load 1000W
Max. Fluorescent lamp load 250 VA

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Light time impulse switch with 3 modes 1 NO contact 16A - Staircase lighting timer 0,25...150min ..."
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.