Installation contactor 40A A9C20844

A9C20844 3606480088629 EAN/GTIN DE 33842582 WEEE

Our best price
£36.65 incl. VAT (£0.00)
£140.93 (-73.99% RRP***)

14-16 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Installation contactor 40A 4S 220-240VAC A9C20844 rated operating voltage 400 ... 400V, rated... more
Installation contactor 40A A9C20844 – Schneider Electric – 3606480088629: Installation contactor 40A 4S 220-240VAC A9C20844 rated operating voltage 400 ... 400V, rated operating current 40A, category of use 7, rated operating voltage 220 ... 240V, voltage type of the operating voltage AC, voltage type of the operating voltage AC, number of contacts as NO contact 4, number of contacts as NC contact 0 , Max. Incandescent lamp load 15750W, Max. Fluorescent lamp load 7200VA, Max. Fluorescent lamp load (duo circuit) 11400VA, Max Acti 9 iCT. Rated current 40A, 4S, control voltage 220/240V, 50Hz, insulation voltage (Ui) 500V AC. Switching circuits up to 100A. Terminals IP 20. Low-noise switching. Mechanical switch position indicator. Installation contactors with preselection have an operating mode selector switch with four switching positions on the front. Compatible with the entire Acti 9 range. The iCT installation contactor complies with the following standards - EN 61095 and IEC 1095. This range is also VDE certified!.
... more
Rated operating voltage 400V
Rated operating current 40 A
Utilization category 7
Rated control voltage 220..240 V
Voltage type of the operating voltage AC
Voltage type of the actuating voltage AC
Number of contacts as normally open 4
Max. Incandescent lamp load 354 V
Max. Fluorescent lamp load 7200 VA
Slider for manual operation no
Width in division units 3
Depth 43.5 mm
Additional equipment possible yes
IP protection) IP20

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Installation contactor 40A A9C20844"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.