Multi 9 OEM MCB 1-p.20A 10kA 277V - Miniature circuit breaker 1-p C20A M9F22120

Schneider Electric - M9F22120 - Multi 9 OEM MCB 1-p.20A 10kA 277V - Miniature circuit breaker 1-p C20A M9F22120
Photo source: fig. possibly similar
M9F22120 3606481168177 EAN/GTIN DE 33842582 WEEE

£10.40 incl. VAT (£0.00)
£18.99 (-45.23% RRP***)

14-16 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Multi 9 OEM circuit breaker 1-p.20A 10kA 277V M9F22120 tripping characteristic C, number of poles... more
Multi 9 OEM MCB 1-p.20A 10kA 277V - Miniature circuit breaker 1-p C20A M9F22120 – Schneider Electric – 3606481168177: Multi 9 OEM circuit breaker 1-p.20A 10kA 277V M9F22120 tripping characteristic C, number of poles (total) 1, number of fused poles 1, rated current 20A, rated voltage 277V, rated insulation voltage Ui 500V, rated impulse withstand voltage Uimp 6kV, rated switching capacity Icu according to IEC 60947-2 at 230 V 10kA, rated switching capacity Icu according to IEC 60947-2 at 400 V 3kA, type of voltage AC, frequency 50... 60Hz, neutral conductor switching, overvoltage category 4, degree of pollution 3, additional equipment possible, width in modular units 2, installation depth 44mm, protection class (IP ) IP20, Ambient temperature during operation -30... 70°C, Connectable conductor cross-section, stranded 1... 16mm², Connectable conductor cross-section, solid 1... 25mm², Circuit breaker C60SP Multi 9 OEM, 10 kA. 1-pole, rated current 20A, C characteristic, operating voltage (Ue) 240V AC IEC/EN 60947-2 / 277V AC UL 1077, insulation voltage (Ui) 500V AC. Single connection terminal for cables and pin comb rails on the top and bottom of the device. Attachment via normal clip fastener on DIN rail. Snap action for low-wear switching of the contacts. Additional add-on auxiliary modules (optional): indication of switching position (OF), fault tripping (SD), shunt release (MX, MX+OF), undervoltage release (MN, MNs, MNx). Tool-free assembly on the left side of the device. The C60SP complies with the following standards: IEC/EN 60947-2, UL 1077 / CSA C22.2 No.235 / GB 14048-2. Miniature circuit breakers C60SP are multistandard miniature circuit breakers that can be used worldwide because they meet all international and all important national standards. All miniature circuit breakers are available under the same item no. can be ordered and delivered in every country in the world where Schneider Electric is represented
... more
Depth 44 mm
Release characteristic C
Number of poles (total) 1
Number of secured poles 1
Rated current 20 A
Rated voltage 277 V
Rated insulation voltage Ui 500V
Rated impulse withstand voltage Uimp 6 kV
Voltage AC/DC
Frequency 50..60 Hz
Flush mounting no
Coupling neutral conductor yes
Overvoltage category 4
Pollution degree 3
Additional equipment possible yes
Width in division units 2
IP protection) IP20
Explosion protection no

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Multi 9 OEM MCB 1-p.20A 10kA 277V - Miniature circuit breaker 1-p C20A M9F22120"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.