RCD 4P 40A 30mA - Residual current breaker 4-p A9Z61440

RCD 4P 40A 30mA - Residual current breaker 4-p A9Z61440 – Schneider Electric – 3606489502706: FI switch 4P 40A 30mA A9Z61440 number of poles 4, rated voltage 400V, rated current 40A, rated residual current 30mA, rated insulation voltage Ui 500V, rated impulse withstand voltage Uimp 6kV, mounting type DIN rail, residual current type B, short-circuit strength (Icw) 10kA, surge current strength 3kA, frequency 50 Hz, Additional equipment possible, with locking device, degree of protection (IP) IP20, width in modular widths 4, installation depth 44mm, ambient temperature during operation -25 ... 60°C, degree of pollution 3, connectable conductor cross-section stranded 1 ... 25mm², connectable conductor cross-section solid 1 . .. 35mm², residual current circuit breaker universal current sensitive Acti 9 iID. 4-pole, rated current 40A, type B-SI, rated residual current 30mA, operating voltage (Ue) 400 AC, 50Hz, insulation voltage 500V AC. Snap action for low-wear switching of the contacts. With mechanical error message display on the front (VisiTrip) for displaying trips due to residual current. Safe contact indicator (VisiSafe) of the residual current circuit breaker, green indicator means there is no voltage on the outgoing side. Test button for regular function testing. Double connection terminals for connecting cables or busbars on both sides. Simple removal of the individual device with the phase busbar installed, thanks to the fastening element that can be reached from the front. Additional add-on auxiliary modules (optional) undervoltage release (iMN), overvoltage release (iMSU), shunt release (iMX), auxiliary switch for status reporting (iOF), fault signaling switch (iSD). Type B-SI integrates SI technology, which offers higher immunity to electrical interference. Protects against smooth DC residual currents in 1- or 3-phase supply networks caused by frequency converters, inverters and emergency power supplies. Color RAL 9003. Complies with the following standards IEC/EN 61008-2-1,IEC/EN 62423,IEC 61543,VDE 0664.