Impulse switch 2 NO, potential free 16A 250V AC ES12Z-200-UC

ES12Z-200-UC 21200601 4010312107690 EAN/GTIN DE 30298319 WEEE

Our best price
£32.33 incl. VAT (£0.00)
£60.83 (-46.85% RRP***)

14-16 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Impulse switch 2S potential-free 16A/250V ES12Z-200-UC Electronic function switch, mounting type... more
Impulse switch 2 NO, potential free 16A 250V AC ES12Z-200-UC – Eltako – 21200601 – 4010312107690: Impulse switch 2S potential-free 16A/250V ES12Z-200-UC Electronic function switch, mounting type DIN rail, width in modular units 1, installation depth 58mm, number of contacts as NO contact 2, number of contacts as NC contact 0, number of contacts as changeover contact 0 , control voltage 1 8 ... 230V, type of control voltage 1 AC/DC, frequency of control voltage 1 50 ... 50Hz, control voltage 2 8 ... 230V, frequency of control voltage 2 50 ... 50Hz, rated switching current 16A, supply voltage 250 .. 250V, type of supply voltage AC, max. incandescent lamp load 2000W, max. fluorescent lamp load 1000VA, max. Manual operation possible, impulse switch with potential-free contacts, also for central control. Standby loss only 0.03 to 0.4 watts. Priorities of the central control selectable. The latest hybrid technology combines the advantages of wear-free electronic control with the high performance of special relays. With additional central on and central off control inputs for 8..230V UC, electrically isolated from the local control input. Supply voltage same as local control voltage. Very low switching noise. Glow lamp current from 110V control voltage up to 50mA in switch positions 1 to 3 and 5 to 7. By using a bistable relay there is no coil power loss even when switched on and no heating as a result. After installation, wait for the brief automatic synchronization before the switched consumer is connected to the mains. Maximum current as a sum over both contacts 16A at 230V. With activation LED. This flashes after 15 seconds when the local button is blocked, not in rotary switch positions 4 and 8. This impulse switch can be completely or partially excluded from the central control with the upper rotary switch.
... more
Function electronic switch
Mounting DIN rail
Width in division units 1
Depth 58 mm
Number of contacts as normally open 2
Control voltage 1 8..230 V
Control voltage type 1 AC/DC
Frequency of control voltage 1 50 Hz
Control voltage 2 8..230 V
Frequency of control voltage 2 50 Hz
Rated operating current 16 A
Supply voltage 250V
Voltage type of the supply voltage AC
Max. Incandescent lamp load 2000 W
Max. Fluorescent lamp load 1000 VA
Suitable for manual operation no

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Impulse switch 2 NO, potential free 16A 250V AC ES12Z-200-UC"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.