Interface module - Central control module KMAi-E08 24ACDC 20mA

Metz - KMAi-E08 24ACDC 20mA - Interface module - Central control module KMAi-E08 24ACDC 20mA
Photo source: fig. possibly similar
Photo source: fig. possibly similar
KMAi-E08 24ACDC 20mA 110659 4250184122920 EAN/GTIN DE 87494433 WEEE

Our best price
£22.60 incl. VAT (£0.00)
£41.29 (-45.27% RRP***)

14-16 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Interface module KMAi-E08 24ACDC 20mA follow-up function, number of channels 0, time range 0min,... more
Interface module - Central control module KMAi-E08 24ACDC 20mA – Metz – 110659 – 4250184122920: Interface module KMAi-E08 24ACDC 20mA follow-up function, number of channels 0, time range 0min, number of universal dimming channels 1, number of dimming functions 1, current surge function, number of channels 0, roller shutter/sun protection control, number of channels 0, number of channels 1, Control voltage 1 24 ... 24V, rated current 0.02A, rated voltage 24 ... 24V, rated frequency 0Hz, width in division units 2, width 35mm, The analog value transmitter is used for manual control value adjustment, e.g. B. for mixing flaps, valve positions, temperature values, etc. The module can be controlled using two operating modes, which are set using the two-stage switch (HAND, AUTO) on the front. The switch position is reported via the external control contact terminals B1 and B2. Switch position HAND: The manipulated variable can be adjusted using the potentiometer on the front. The output signal 0 to 20mA is available at terminal Y. The current flow at the YR input is not interrupted. Switch position AUTO: The input current (YR) is transferred to the manipulated variable output Y with a tolerance of ± 5% (full scale value). Setpoint generator, manual control level with feedback, LED brightness proportional to the manipulated variable
... more
Bidirectional no
Galvanic separation without
Rated current consumption 30 mA

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Interface module - Central control module KMAi-E08 24ACDC 20mA"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.