Electronics module for ET 200S - Fieldbus analogue module 2 In / 0 Out 6ES7134-4GB11-0AB0

Siemens - 6ES7134-4GB11-0AB0 - Electronics module for ET 200S - Fieldbus analogue module 2 In / 0 Out 6ES7134-4GB11-0AB0
Photo source: fig. possibly similar
Photo source: fig. possibly similar
6ES7134-4GB11-0AB0 4025515072430 EAN/GTIN DE 23691322 WEEE

£254.95 incl. VAT (£0.00)

3-5 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Electronic module for ET 200S 6ES7134-4GB11-0AB0 supply voltage at AC 50 Hz 0V, supply voltage at... more
Electronics module for ET 200S - Fieldbus analogue module 2 In / 0 Out 6ES7134-4GB11-0AB0 – Siemens – 4025515072430: Electronic module for ET 200S 6ES7134-4GB11-0AB0 supply voltage at AC 50 Hz 0V, supply voltage at AC 60 Hz 0V, supply voltage at DC 20.4... 28.8V, voltage type of the supply voltage DC, input, current, input signal configurable, resolution of analog inputs 14 bit, number of analog inputs 2, number of analog outputs 0, analog inputs configurable, number of HW interfaces Industrial Ethernet 0, number of interfaces PROFINET 0, number of HW interfaces serial RS-232 0, number of HW Interfaces serial RS-422 0, number of HW interfaces serial RS-485 0, number of HW interfaces serial TTY 0, number of HW interfaces parallel 0, number of HW interfaces wireless 0, number of HW interfaces USB 0 , number of HW interfaces other 0, system component, degree of protection (IP) IP20, design of the electrical connection screw/spring-loaded connection, fieldbus connection via separate bus coupler possible, DIN rail mounting possible ch, wall/direct mounting possible, front mounting possible, explosion protection category for gas ATEX gas explosion protection, cat. 3G, explosion protection category for dust without, width 15mm, height 81mm, depth 52mm, by using the F electronic modules With the ET 200S it is possible to solve the safety-related application requirements in an integrated manner in the overall automation. The safety functions required for fail-safe operation are integrated into the modules
... more
Supply voltage at AC 50 Hz 0 V
Supply voltage at AC 60 Hz 0 V
Supply voltage at DC 20.4..28.8 V
Voltage type of the supply voltage DC
Entrance, electricity yes
Input, voltage no
Entrance, resistance no
Entrance, resistance thermometer no
Input, thermocouple no
Input signal configurable yes
Resolution of the analog inputs 14 bits
Output, electricity no
Output, voltage no
Number of analog inputs 2
Analog inputs configurable yes
Supports protocol for TCP / IP no
Supports protocol for PROFIBUS no
Supports protocol for CAN no
Supports protocol for INTERBUS no
Supports protocol for ASI no
Supports protocol for KNX no
Supports protocol for MODBUS no
Supports data highway protocol no
Supports protocol for DeviceNet no
Supports protocol for SUCONET no
Supports protocol for LON no
Supports protocol for PROFINET IO no
Supports protocol for PROFINET CBA no
Supports protocol for SERCOS no
Supports protocol for EtherNet / IP no
Supports protocol for DeviceNet Safety no
Supports protocol for INTERBUS safety no
Supports protocol for PROFIsafe no
Supports protocol for SafetyBUS p no
Wireless standard Bluetooth no
Wireless standard WLAN 802.11 no
Radio standard GPRS no
Radio standard GSM no
Radio standard UMTS no
IO-Link master no
System component yes
IP protection) IP20
Rail mounting possible yes
Wall / direct mounting possible yes
Front installation possible yes
Rack mounting possible no
Suitable for safety functions no
Associated equipment (Ex ia) no
Associated equipment (Ex ib) no
Explosion protection category for dust without
Width 15 mm
Height 81 mm
Depth 52 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Electronics module for ET 200S - Fieldbus analogue module 2 In / 0 Out 6ES7134-4GB11-0AB0"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.