Radio receiver 1 channel canopy D 451 FU-B EBI

Radio receiver 1 channel canopy D 451 FU-B EBI – Peha – 00364376 – 4010105364378: Radio receiver 1-channel canopy D 451 FU-B EBI In the housing, power supply 230 V AC, push-button operation, switching operation, number of relays 1, type of installation flush-mounted, material plastic, material quality thermoplastic, halogen-free, surface untreated, finish of the surface not Applicable, Type of attachment Other, Color white, Suitable for degree of protection (IP) IP20, Radio frequency 868MHz, The bidirectional Easyclick receiver not only receives the radio signals, but also sends back its status with every change in status. Real switching states ON/OFF can be e.g. B. visualized on the hand transmitter D 450 FU-HS 128. The Easyclick receiver is used to switch lighting and other electrical consumers. Various functions and parameters can be selected: - Two-button operation ON/OFF (standard function) - One-button operation ON/OFF (toggle) - Button operation (impulse) - Hotel card switch with selectable run-on time - Staircase light with selectable run-time and switch-off pre-warning - automatic OFF after selectable run-time - Fan function with delayed ON and selectable run-on time - save and call up 4 light scenes at the push of a button (one light scene per button) - window handle and window contact, visualization also parallel to the switching outputs - motion detector and light sensor - a function can be programmed individually for each of the max. 32 transmitters be determined. - Regardless of the set functions, integrated repeater functions (1-level/2-level) can be switched on depending on the project. - When teaching z. B. window contacts, window handles and motion detectors, these are already assigned in the corresponding function/parameter. Technical data: Own consumption: < 0.5 W (bistable relay) Transmission frequency: 868.3 MHz Power supply: 100-240 V~/50-60 Hz Neutral conductor: required Ambient temperature: -20 °C to +40 °C Storage temperature: -40 °C to +85 °C Connecting wires: 1.5 mm² blue, black, brown Housing height: 28 mm Housing: with screw hook hole Degree of protection: IP 20 Approvals: CE, KEMA/KEUR Load types 230 V~ (110 V~) Incandescent lamps 2500 W ( 1250 W) HV halogen lamps 1200 W (600 W) Motor load 600 VA (300 VA) ECG load 3 pieces (3 pieces) The number depends on the type and manufacturer. The data sheet of the device must be observed!