Stand storage 200l, 6bar HSTP 200

Stiebel Eltron - HSTP 200 - Stand storage 200l, 6bar HSTP 200
Photo source: fig. possibly similar
HSTP 200 071264 4017210712643 EAN/GTIN DE 58834923 WEEE

Our best price
£1,241.12 incl. VAT (£0.00)
£1,635.91 (-24.13% RRP***)

3-5 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Freestanding storage tank 200l, 6bar HSTP 200 energy efficiency class C, energy efficiency class... more
Stand storage 200l, 6bar HSTP 200 – Stiebel Eltron – 071264 – 4017210712643: Freestanding storage tank 200l, 6bar HSTP 200 energy efficiency class C, energy efficiency class spectrum A to G, boiler material steel, jacket material steel, volume of the tank 200l, rated output 6kW, connection voltage 230 ... 400V, three-phase version, frequency 50/60 Hz, version floor model , With off-peak mode, can be used with normal water pressure, warm-up time from 10 °C - 65 °C 120 min, tapping capacity at 60 °C, continuous operation 30 l/min, vertical placement, temperature limitation, with circulation connection, max. permissible operating pressure 6 bar, protective anode, height 1570 mm, Width 550 mm, depth 690 mm, cold drinking water connection male thread, nominal inside diameter cold drinking water 1/2 inch (15), pipe outside diameter cold drinking water 33.7 mm, hot water connection male thread, nominal inside diameter hot water connection 1/2 inch (15), pipe outside diameter warm drinking water 33.7 mm, Nominal inner diameter of circulation line 1/2 inch (15), degree of protection (IP) IP24, energy efficiency hot water 39% , XL tapping profile, closed hot water tank (pressure-resistant) made of steel, special enamel on the inside and anti-corrosion rod, for the hot water supply of several tapping points in the home, business and agriculture, also in connection with plastic pipe systems (observe manufacturer's information and application limits). Thermal insulation with low heat losses, plastic cover. Heating flange for two-circuit/single-circuit operation with low-lying radiators. The water is kept at the set temperature depending on the controller (depending on the selected connection). Stepless temperature setting from approx. 35 degrees C to approx. 82 degrees C. Controller-limiter combination with all-pole switch-off, automatic frost protection, rapid heating (once via built-in push button), switch for output variants. Quality and safety marks: VDE/GS mark, radio protection mark, IP24 (splash-proof)
... more
Energy efficiency classes spectrum A to G
Material Jacket Steel
Volume of the container 200 l
Material of the boiler Steel
Rated capacity 6 kW
Supply voltage 230..400V
three-phase design yes
Frequency 50/60 Hz
embodiment Floor model
Base / undermount boiler no
With night current switching yes
low-pressure version no
duo version no
Suitable for boiling water no
Warm-up time from 10°C to 65°C 120 min
Tapping power at 60 °C, continuous operation 30 l/min
wall installation no
Horizontal placement no
Vertical placement yes
With temperature display no
With temperature limit yes
With circulation connection yes
Max. permissible operating pressure 6 bar
With faucet no
With pressure reducing valve no
With thermometer no
With cleaning opening no
protective anode yes
Height 1570 mm
Width 550 mm
Depth 690 mm
Cold drinking water connection External thread
Nominal diameter cold drinking water 1/2 inch (15)
Outside pipe diameter cold drinking water 33.7 mm
Hot water connection External thread
Nominal diameter warm water connection 1/2 inch (15)
Outside pipe diameter hot drinking water 33.7 mm
Nominal diameter circulation line 1/2 inch (15)
IP protection) IP24
Energy efficiency hot water 39 %
tap profile XL

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Stand storage 200l, 6bar HSTP 200"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.