Switching power supply 12V/12W FSNT14-12V/12W

FSNT14-12V/12W 30014062 4010312315095 EAN/GTIN DE 30298319 WEEE

Our best price
£36.40 incl. VAT (£0.00)
£49.45 (-26.39% RRP***)

3-5 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Switching power supply 12V/12W FSNT14-12V/12W Type of voltage of the supply voltage AC, 1. Output... more
Switching power supply 12V/12W FSNT14-12V/12W – Eltako – 30014062 – 4010312315095: Switching power supply 12V/12W FSNT14-12V/12W Type of voltage of the supply voltage AC, 1. Output voltage 12 ... 12V, max. Power output 12W, stabilized, design of the electrical connection screw connection, DIN rail mounting possible, suitable for series installation, width in modular units 1, installation width 18mm, width 18mm, height 58mm, depth 58mm, degree of protection (IP) IP20, switching power supply. Standby loss only 0.2 watts. If the total power requirement of a Series 14 bus system is higher than 8W, additional switching power supplies are required. These must not be connected in parallel, but each supply a group of actuators, which are separated with a separator on the FSNT14. The scope of delivery includes 1 separating bridge TB14 1 HP, 1 jumper 1.5 HP and a spacer DS14. With a load greater than 50% of the nominal power and always with switching power supplies and dimmers lying next to each other, a 1/2 module ventilation distance with the spacer DS14 is required. This and a long jumper are therefore included. Efficiency 83%. Stabilized output voltage plusminus1%, low residual ripple. short-circuit proof. Overload and overtemperature protection by switching off with automatic switching on after the error has been eliminated (auto recovery function). This switched-mode power supply can also be used to create redundancy. For this, only 1 FSNT14 may be connected in parallel to the integrated power supplies in the FAM14 and FTS14KS and connected with a normal jumper. The FSNT14 should be placed next to the last actuator in the bus for optimal load distribution.
... more
Voltage type of the supply voltage AC
1. Output voltage 12V
Max. Output current 1 1 A
Output voltage adjustable no
Nominal output voltage 1 12V
Short circuit protection yes
Rated supply voltage at AC 50 Hz 230V
Output voltage regulated yes
Power output 12 W
Stabilized yes
Rail mounting possible yes
Wall mounting possible no
Suitable for serial installation yes
Width in division units 1
Installation width 18 mm
Width 18 mm
Height 58 mm
Depth 58 mm
IP protection) IP20

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Switching power supply 12V/12W FSNT14-12V/12W"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.