The following 1170 products have been found matching your search "WGAP":

Item/s (1170)

Categories | Others (7)

Found in shop categories: 7

Wire retainer - If cables are routed through self-drilled holes, especially if they are made of metal, there is always a risk that burrs and sharp edges will damage the insulation or even the current-carrying wires of a line or cable. In addition, in the rarest of cases, the hole produced is identical to the cable diameter. This creates a gap that allows debris to either enter or allow a loose cable to rub against the edge of the hole and become damaged over time. This is where the cable sockets from the eibabo technology store come to the rescue. These are available in different diameters, are made of soft plastic and thus close self-made holes, but also the openings at the ends of installation and empty pipes. Holes corresponding to the cable diameter can be punched through the pre-embossings attached to the cable insertion sockets, with which a tight seal of the cable bushing is then guaranteed.Catalogue content:In this eibabo® catalogue Cable and wire entry systems > Cable plug sealing clamp you will find items from the following product groups:Item overview:Blanking plugCable entryCable entry glandCable glandsCable inletCable plug sealing clampCable socketChoke stopperDouble membrane nozzleGag nippleGrommetInsertNozzlePipe socketPlastic cable glandPlastic nipplePlug-in cable glandPlug-in sealPlug-in socketPressure compensation elementPressure equalization nozzlePush-in pipe socketPush-in plugScrew-in nippleSealing nippleSealing plugSocketStepped socketfrom the following manufacturers:Manufacturer overview catalogue Wire retainer:CorningEatonHagerHenselIcotekJacobKaiserKleinhuisLappLegrand BticinoLützeMurrelektronikMurrplastikOBOPhoenixRSTSchneider ElectricSES SterlingSpelsbergWeidm?llerWiska
Combi i/o device - Combi IO devices are essential components of complex building automation. Find out here how to use the high-quality IO devices and what options there are for your installation. In any case, these devices increase the efficiency of your installation. Learn more about these modules and why it is so important for them to work properly.What is an IO device?An IO device - also known as an input-output module - enables communication between a computer system and a peripheral device. This type of processor communication between devices increases a computer's capabilities. The operating system is enabled to connect to the outside world. Communication and interaction takes place through sending and receiving information. Possible input information are, for example, signals from user inputs or binary inputs. Output signals are sent by the system or converted into actions as manipulated variables by actuators. With the use of a multifunctional input module, the work can be carried out more efficiently and accurately. Typical IO devices include:KNX universal interfacesKNX universal controllerKNX switching actuators with integrated binary inputsKNX button interfaces with outputs for LED controlspecial KNX room controller with a variety of special functions  TIP:An IO device can interface with a large number of bus protocols, for example PC Cards, USB, PCI, VMEbus and FireWire. In this eibabo® category you will find, for example, KNX devices with multiple functions from top manufacturers such as ABB, Berker, Busch-Jaeger, Gira, Hager, Issendorf, Jung, Lingg & Janke, MDT, Merten, Siemens and Theben.What are the most important functions of an IO device?An IO device is an essential link in the control chain and closes the gap between your computer system and the external devices. It can perform multiple functions including:Communication between the devices in the systemAn IO device assumes several functions within the scope of device communication. This includes the transmission of status messages, the sending of commands and the transmission of information.communication to the processorFull communication with the processor includes recognizing its own IP address, decoding and accepting commands, and reporting status updates.error managementAn IO device detects different types of problems that can occur between the computer system and a peripheral device. These can be mechanical problems, such as a used printer cartridge or errors that occur during data transfer.Image: ABB IO actuator 8-fold IO/S8.6.1.1timingIn order to be able to correctly manage the flow of information between the system and the external device as part of time management, the IO device accesses the internal resources of a computer.data bufferingOne of the most important functions of an IO device is managing the transmission speed between memory, processor and other external devices.How and where can IO devices be mounted?There are many options for mounting IO devices and they depend on your existing installation. Choose from the following options:Panel mounting - the unit is bolted to a chassis or attached to a panelRack mounting - the device fits into a standard housing, such as a 19-inch rack or similarInstallation on DIN rails - the device is attached to one of the common DIN rails or G-railsfree installation - the device has a stable housing and is set up in a freely selectable placePrinted circuit board assembly - the device plugs directly into computers or is attached to the case What advantages do IO devices offer?Depending on the IO device involved, each can play a significant role within an effective operating system. In a programmable logic controller (PLC) and other operating systems, these devices offer the following advantages:a compact design saves space in almost any assembly environmentthe installation can be done remotelyHardware and associated costs can be savedthe wiring and cable setup is simple and clear What are the properties of the inputs and outputs on the IO devices?As a rule, IO devices offer digital channels, analog channels or a combination of both variants. The digital inputs and outputs handle low-level on-off signals. Analog inputs recognize signals such as current, voltage or frequency. Devices with combined channels often process the signals using analog-to-digital converters.The input channels of a device are differentiated as single-ended (SE) or differential (DI). Single-ended inputs consist of two contacts, one of which carries a voltage. The other is connected to ground. Such installation is simpler and cheaper than differential signaling. However, the inductance of the signal line and the difference in ground voltage between the transmitter and receiver will cause noise interference. Differential communication uses two mutual signals on two paired contacts. The difference between the two signals represents the meaningful signal value. Common-mode rejection prevents noise interference. Differential inputs respond to the voltage difference between the two contacts. These are therefore suitable for low-voltage, long-distance and high-resolution applications. The type of input channels your device has can usually be found in the product description. For example, if you have a 16SE-8DI device, it offers 16 single-ended and 8 differential inputs.isolationCertain areas of the electrical system can be isolated from others. This avoids unwanted current flow or signal flow between the areas.For isolation, please distinguish between channel-to-channel isolation, isolated analog input, isolated analog output, isolated digital input, and isolated digital output.  Catalogue content:In this eibabo® catalogue Installation bus systems > I/O device for bus system you will find items from the following product groups:Item overview:Blind controlCentralAccessControl deviceControl elementControl panelControl unitDrive elementDriver moduleEngine control unitHeating actuatorHome serverInput moduleInterfaceJunction boxLight actuatorMixing moduleMulti-controllerOutdoor areaRadio systemSecurity adapterShutter actuatorSmartphoneSun protection actuatorSwitching actuatorSwitching outputUniversal interfaceWireless solutionWireless switching outputfrom the following manufacturers:Manufacturer overview catalogue Combi i/o device:ABBBusch JaegerGiraHagerLingg & JankeMetzSiedleSomfyWaremaWindowMaster
Protective isolating spark gap - Surge voltages caused by lightning strikes are rare but always very annoying events, especially when parts of the building and electrical equipment are damaged due to an inadequate lightning protection system. Isolating spark gaps are components of lightning protection systems and are used for equipotential bonding. They are used to isolate grounded and other conductors with an earth effect that must not be permanently connected together in such a way that when high voltage peaks occur, for example when lightning strikes, they still connect briefly for the purpose of equipotential bonding. A large selection of isolating spark gaps is available to you in the eibabo online shop. Please plan your lightning protection system carefully and discuss the choice of the right components with your electrician. We will deliver the required isolating spark gaps and other lightning protection products quickly and reliably directly to your construction site.Catalogue content:In this eibabo® catalogue Earthing, lightning and surge protection > Protective / Isolating spark gap for lightning protection you will find items from the following product groups:Item overview:Energy TechnologyIsolating spark gapsLightning protection spark gapOvervoltage protectionProtective / Isolating spark gap for lightning protectionProtective spark gapProtective spark gap for lightning protectionProtective/isolating spark gap for lightning protectionSpark gapfrom the following manufacturers:Manufacturer overview catalogue Protective isolating spark gap:ABNDEHNOBOPhoenix
Lightning current arresters - el. - Lightning and surges are among the unforeseeable and incalculable risks that can occur when operating electrical and electronic systems and devices. In order to prevent damage or destruction of these systems, overvoltage protection measures are taken in their installations. A reliable lightning current arrester is part of it. Its task is to limit the voltage that occurs within a system to the maximum permissible level and to divert any overvoltages that may be caused by lightning in the direction of earth. Protect your electrical installations with high-quality lightning arresters from your eibabo online shop. We guarantee secure payment, fast delivery and an uncomplicated exchange if you don't like a product.Catalogue content:In this eibabo® catalogue Earthing, lightning and surge protection > Lightning current arrester for power supply systems you will find items from the following product groups:Item overview:Arrester moduleB arresterClass B arresterClass I arresterCombined arresterEnergy TechnologyInternal lightning protectionLightning arresterLightning arrester for power engineeringLightning ControllerLightning current arrester for power supply systemsLightning protectionMains surge protectionOver voltage protectionOvervoltage protectionProtectionProtective adapterRough protectionSpark gapSpark gap topSurge adapterSurge arrestersSurge protection deviceSurge Protection DevicesSurge protection socketSurge Protection SystemType 1 arresterUpper part spark gapfrom the following manufacturers:Manufacturer overview catalogue Lightning current arresters - el.:ABBDEHNEatonFinderHagerOBOPhoenixSchneider ElectricStiebel EltronWeidmüller
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to

1 From 98
No results were found for the filter!
RECOMMENDED
3D
Berker - 6130763545 - Rocker for W1, 1gang, grey - Cover plate for switch/push button grey 6130763545
£4.38 incl. VAT (£0.00)

*

plus shipping
(£6.40 RRP***)
Rocker for W1, 1gang, grey - Cover plate for switch/push button grey
Berker
| 6130763545
RECOMMENDED
3D
Dehn - DSH ZP B TT 255 - Combination arrester DEHNshield ZP basic, type 1 + 2, with spark gap technology DSH ZP B TT 255
£142.85 incl. VAT (£0.00)

*

plus shipping
(£430.07 RRP***)
Combination arrester DEHNshield ZP basic, type 1 + 2, with spark gap technology
Dehn
| DSH ZP B TT 255
RECOMMENDED
3D
Dehn - DV ZP TT 255 - Combined arrester with RADAX-Flow spark gap technology, DEHN valve ZP TT DV ZP TT 255
£631.77 incl. VAT (£0.00)

*

plus shipping
(£1,511.11 RRP***)
Combined arrester with RADAX-Flow spark gap technology, DEHN valve ZP TT
Dehn
| DV ZP TT 255
RECOMMENDED
3D
Hager - SPA701Z - Combined arrester for power systems SPA701Z
£216.71 incl. VAT (£0.00)

*

plus shipping
(£408.99 RRP***)
Combined arrester for power systems
Hager
| SPA701Z
RECOMMENDED
3D
Dehn - DSH B TNC 255 FM - Application-optimised combi drain Type 1+2 TN-C systems - Combined arrester for power systems DSH...
£175.23 incl. VAT (£0.00)

*

plus shipping
(£358.21 RRP***)
Application-optimised combi drain Type 1+2 TN-C systems - Combined arrester for power systems
Dehn
| DSH B TNC 255 FM
RECOMMENDED
3D
Dehn - DV M TT 255 - Combination arrester DEHNventil M - Combined arrester for power systems DV M TT 255
£651.02 incl. VAT (£0.00)

*

plus shipping
(£1,529.51 RRP***)
Combination arrester DEHNventil M - Combined arrester for power systems
Dehn
| DV M TT 255
RECOMMENDED
3D
Dehn - DSH TNS 255 FM - Combined arrester TN-S-Sys., type 1+2 - Combined arrester for power systems DSH TNS 255 FM
£341.03 incl. VAT (£0.00)

*

plus shipping
(£697.84 RRP***)
Combined arrester TN-S-Sys., type 1+2 - Combined arrester for power systems
Dehn
| DSH TNS 255 FM
RECOMMENDED
3D
Dehn - DSH ZP B2 LSG A TT 2 - Combined arrester for power systems DSH ZP B2 LSG A TT 2
£247.69 incl. VAT (£0.00)

*

plus shipping
(£517.40 RRP***)
Combined arrester for power systems
Dehn
| DSH ZP B2 LSG A TT 2
RECOMMENDED
3D
Dehn - DV M TNS 255 FM - Combination arrester DEHNventil M - Combined arrester for power systems DV M TNS 255 FM
£616.74 incl. VAT (£0.00)

*

plus shipping
(£1,564.29 RRP***)
Combination arrester DEHNventil M - Combined arrester for power systems
Dehn
| DV M TNS 255 FM
RECOMMENDED
3D
Dehn - DSH ZP B2 SG TNS 255 - Combined arrester for power systems DSH ZP B2 SG TNS 255
£225.28 incl. VAT (£0.00)

*

plus shipping
(£473.73 RRP***)
Combined arrester for power systems
Dehn
| DSH ZP B2 SG TNS 255
RECOMMENDED
3D
Hager - SPA801Z - Combined arrester for power systems SPA801Z
£375.46 incl. VAT (£0.00)

*

plus shipping
(£649.37 RRP***)
Combined arrester for power systems
Hager
| SPA801Z
RECOMMENDED
3D
Dehn - DSH TNS 255 - Combination arresters TN-S systems DSH TNS 255
£292.78 incl. VAT (£0.00)

*

plus shipping
(£636.74 RRP***)
Combination arresters TN-S systems
Dehn
| DSH TNS 255
1 From 98