Rope thimble - Accessory for sensor 3SE7930-1AC (VE4)

Siemens - 3SE7930-1AC (VE4) - Rope thimble - Accessory for sensor 3SE7930-1AC (VE4)
Photo source: fig. possibly similar
Photo source: fig. possibly similar
3SE7930-1AC (VE4) 3SE79301AC 4011209318984 EAN/GTIN DE 23691322 WEEE Content 4

£1.50 incl. VAT (£0.00)
£2.74 (-45.26% RRP***)

14-16 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Cable thimble 3SE7930-1AC (VE4) Type of accessory Other, The cable pull switches are used for... more
Rope thimble - Accessory for sensor 3SE7930-1AC (VE4) – Siemens – 3SE79301AC – 4011209318984: Cable thimble 3SE7930-1AC (VE4) Type of accessory Other, The cable pull switches are used for monitoring or as an EMERGENCY STOP device on particularly endangered system parts. Since the effective range of pull-rope switches is limited by the length of the pull cord, large systems can also be secured with them. Pull-wire switches to be pulled on both sides and belt alignment devices primarily monitor very long belt systems
... more
Type of accessories/spare parts other
Equipment yes
Spare part no

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Rope thimble - Accessory for sensor 3SE7930-1AC (VE4)"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.