Converter Sinamics 1.5kW unfiltered - Frequency converter 200...240V 1,5kW 6SL3210-5BB21-5UV1

Siemens - 6SL3210-5BB21-5UV1 - Converter Sinamics 1.5kW unfiltered - Frequency converter 200...240V 1,5kW 6SL3210-5BB21-5UV1
Photo source: fig. possibly similar
Photo source: fig. possibly similar
6SL3210-5BB21-5UV1 4042948676974 EAN/GTIN DE 23691322 WEEE

Our best price
£165.94 incl. VAT (£0.00)
£244.65 (-32.17% RRP***)

14-16 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Converter SINAMICS 1.5kW unfiltered 6SL3210-5BB21-5UV1 Mains voltage 200 ... 240V, mains... more
Converter Sinamics 1.5kW unfiltered - Frequency converter 200...240V 1,5kW 6SL3210-5BB21-5UV1 – Siemens – 4042948676974: Converter SINAMICS 1.5kW unfiltered 6SL3210-5BB21-5UV1 Mains voltage 200 ... 240V, mains frequency 50/60 Hz, number of input phases 1, number of output phases 3, max. output frequency 550Hz, max. output voltage 240V, rated output current I2N 7.8A, max. output power at square. Load at rated output voltage 1.5kW, Max. power output with linear load at rated output voltage 1.5kW, Relative symmetrical mains frequency tolerance -5%, Relative symmetrical mains voltage tolerance -15%, Number of analogue outputs 1, Number of analogue inputs 2, Number of digital outputs 2, Number of digital inputs 4, With control element, Can be used in industrial areas, Supports protocol for MODBUS, Supports protocol for other bus systems, Number of HW interfaces Industrial Ethernet 0, Number of interfaces PROFINET 0, Number of HW interfaces serial RS- 232 1, number of HW interfaces serial RS-422 0, number of HW interfaces serial RS-485 1, number of HW interfaces serial TTY 0, number of HW interfaces USB 0, number of HW interfaces parallel 0, Number of HW interfaces others 1, type of converter U converter, degree of protection (IP) IP20, height 160.9mm, width 91mm, depth 147mm, SINAMICS V20 1 AC 200-240 V - 10/+ 10 % 47-6 Rated power 1.5 kW with 150 % overload for 60 s unfiltered I/O interface: 4 DI, 2 DO, Fieldbus: USS/MODBUS RTU with built-in BOP protection : IP20/ UL open Str.: Str. AC 160x90x147(HxWxD) frequency converter SINAMICS V20. Easy. Robust. Efficient. For industrial and commercial applications in the 1AC 200 V to 240 V voltage range. SINAMICS V20 is characterized by short commissioning times, simple operation, robustness and cost efficiency. The converter can be operated straight out of the box without additional modules. To increase energy efficiency, the converter is equipped with an energy-optimized control process with automatic flux reduction. It also shows the current energy consumption and has other integrated energy saving functions. The keep-running mode enables stable operation even under difficult and fluctuating network conditions. The converter is available in nine sizes in a power range from 0.12 kW to 30 kW for operation on single and three-phase networks (200 V to 240 V 1AC, 380 V to 480 V 3AC). The SINAMICS V20 can be individually adapted to the requirements of the application using various options, such as the local Basic Operator Panel (BOP) or mobile SINAMICS V20 Smart Access Module operating unit, BOP interface, standard network cable, line filter, braking resistors, shielding, etc. It also enables simple system configuration with predefined macros in the converter and ready-made function blocks from the Totally Integrated Automation Portal (TIA Portal) for quick connection to a SIMATIC S7-1200 controller, for example. The SINAMICS V20 basic converter is a technical and economical alternative to the Micromaster 420 frequency converter. SINAMICS - simply my drive.
... more
Mains voltage 200..240 V
Power frequency 60 Hz
Input phase number 1
Output phase number 3
Max. Output frequency 550 Hz
Max. Output voltage 240V
Rated output current I2N 7.8 A
Relative symmetric power frequency tolerance -5%
Relative symmetrical mains voltage tolerance 10%
Number of analog outputs 1
Number of analog inputs 2
Number of digital outputs 2
Number of digital inputs 4
With operating element yes
Use in the industrial sector permitted yes
Use in residential and commercial areas permitted no
Supports protocol for TCP / IP no
Supports protocol for PROFIBUS no
Supports protocol for CAN no
Supports protocol for INTERBUS no
Supports protocol for ASI no
Supports protocol for KNX no
Supports protocol for MODBUS yes
Supports data highway protocol no
Supports protocol for DeviceNet no
Supports protocol for SUCONET no
Supports protocol for LON no
Supports protocol for PROFINET IO no
Supports protocol for PROFINET CBA no
Supports protocol for SERCOS no
Supports protocol for EtherNet / IP no
Supports protocol for DeviceNet Safety no
Supports protocol for INTERBUS safety no
Supports protocol for PROFIsafe no
Supports protocol for SafetyBUS p no
Supports protocol for other bus systems yes
Number of HW interfaces serial RS-232 1
Number of HW interfaces serial RS-485 1
Number of HW interfaces other 1
With optical interface no
With PC connection no
Integrated brake chopper no
4-quadrant operation possible no
Type of inverter Voltage converters
IP protection) IP20
Height 160,89999999 mm
Width 91 mm
Depth 147 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Converter Sinamics 1.5kW unfiltered - Frequency converter 200...240V 1,5kW 6SL3210-5BB21-5UV1"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.