Pneumatic interface for ET 200 pro, 16DO - Fieldbus digital module 16 valve 6ES7148-4EA00-0AA0

Pneumatic interface for ET 200 pro, 16DO - Fieldbus digital module 16 valve 6ES7148-4EA00-0AA0 – Siemens – 4025515074403: Pneumatic interface for ET 200 pro, 16DO 6ES7148-4EA00-0AA0 Supply voltage at DC 20.4 ... 28.8V Type of supply voltage DC Number of digital inputs 0 Number of digital outputs 16 Number of analog inputs 0 Number of analogue outputs 0, number of connectable valves 16, permissible working pressure 3000 ... 8000hPa, nominal flow rate 400.0002l/min, valve switching times from 0 to 1 17ms, valve switching times from 1 to 0 25ms, number of HW interfaces Industrial Ethernet 0, Number of PROFINET interfaces 0, number of HW interfaces serial RS-232 0, number of HW interfaces serial RS-422 0, number of HW interfaces serial RS-485 0, number of HW interfaces serial TTY 0, number of HW interfaces in parallel 0, number of HW interfaces wireless 0, number of HW interfaces USB 0, number of HW interfaces other 0, system component, degree of protection (IP) IP65/IP67, fieldbus connection via separate bus coupler possible, carrier board surface mounting possible, wall/direct mounting possible, front mounting possible, SIL according to IEC 61508-2, performance level according to EN ISO 13849-1 level d, explosion protection category for gas without, explosion protection category for dust without, width 90mm, height 130mm, depth 47mm, SIMATIC DP, pneumatic interface for ET 200 PRO, 16DO pneumatics for coupling with Festo valve terminal CPV-10 incl. bus module The SIMATIC ET 200pro is a very robust and powerful modular decentralized I/O system for installation outside the control cabinet directly on the machine Degree of protection IP65/67. The modules can either be plugged directly into an ET 200pro CPU or connected to a central controller via PROFINET or PROFIBUS. The connection to the central control is also possible wirelessly via WLAN, which enables the use of the SIMATIC ET 200pro in electric monorails, driverless transport systems, in building management and in warehouse logistics. Due to its extensive range of modules, it is used in particular where a finely modular design with different functions is required in harsh environmental conditions. The separation of module and bus/energy connection technology enables a module to be exchanged during operation (so-called hot swapping), which, in conjunction with detailed diagnostics, ensures the availability and productivity of the machine. The system offers a very broad portfolio of modules. In addition to various digital and analog input and output modules in a wide range of configurations, there are also a number of fail-safe modules available for use up to SIL 3 / PLe. Especially for motor control, the ET 200pro system offers integrated solutions in the form of motor starters and frequency converters, which are also available as fail-safe variants. An IO-Link master and a module for connecting RFID component devices via the RS 232 / 422 interface complete the portfolio.