KNX line coupler 5WG1140-1AB13

5WG1140-1AB13 4001869309705 EAN/GTIN DE 23691322 WEEE

Our best price
£178.98 incl. VAT (£0.00)
£381.66 (-53.1% RRP***)

3-5 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Line area coupler 5WG1140-1AB13 bus system KNX, other bus systems without, mounting type REG,... more
KNX line coupler 5WG1140-1AB13 – Siemens – 4001869309705: Line area coupler 5WG1140-1AB13 bus system KNX, other bus systems without, mounting type REG, width in modular units 2, for data exchange between two EIB bus lines with telegrams of up to 64 bytes. Can be used as a line coupler to couple a line to a main line, an area coupler to couple a main line to the area line or a line amplifier (repeater) to couple two segments of the same line, with galvanic isolation of the two bus lines. Loadable filter table to control the data exchange between the two bus lines. Power supply from the main line.
... more
Bus system KNX yes
Bus system KNX radio no
Bus system radio bus no
Bus system LON no
Bus system Powernet no
Other bus systems without
Mounting REG
Width in division units 2

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "KNX line coupler 5WG1140-1AB13"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.