LED recessed wall light - Ceiling-/wall luminaire 1x1W 111262

LED recessed wall light - Ceiling-/wall luminaire 1x1W 111262 – SLV – 4024163112062: LED recessed wall light 111262, suitable for wall mounting=yes, suitable for pendant suspension=no, suitable for ceiling mounting=yes, color temperature can be switched in steps=no, suitable for recessed mounting=yes, luminous flux can be switched in steps=no, suitable for surface mounting=no, lamps =LED not interchangeable, with bulbs=yes, suitable for continuous row configuration=no, suitable for computer workstations according to EN 12464-1=no, suitable for number of bulbs=1, socket=other, housing material=aluminium, housing color=grey, cover material=glass opal, grid design=none, voltage type=DC, LED nominal current at constant current=350 mA, control gear=LED control gear current-controlled, with control gear=yes, dimming 0-10 V=no, dimming 1-10 V=no, dimming DALI=no, DMX dimming=no, DSI dimming=no, potentiometer (device-integrated) dimming=no, GPRS dimming=no, LineSwitch dimming=no, manufacturer-specific dimming=no, mains voltage modulation dimming=no, phase cut-off dimming t=no, phase control dimming=no, programmable dimming=no, RF dimming=no, Sine Wave Reduction dimming=no, touch and dim dimming=no, Zigbee dimming=no, dimming with push button=no, dimming depends on the operating device =no, without dimming function=no, light distributor=diffuser lens/optics/panel, light distribution=symmetrical, light emission=direct, type of protection (IP)=IP20, protection class=III, luminaire with limited surface temperature ''D mark''=no , Suitable for emergency light=no, With motion detector=no, With light sensor=no, Luminaire can be covered with thermal insulation material=no, With air slots=no, Suitable for lamp output=1 W, Max. system output=1 W, Rated luminous flux according to IEC 62722-2-1=40 lm, light color=white, color temperature=3000 K, color rendering index CRI=90-100, width=90 mm, height/depth=90 mm, length=60 mm, installation length=75 mm, installation width=75 mm, installation height/depth=66 mm, type of wiring=termination, With our FRAME series we offer you the space-saving Lic ht solution for wall and ceiling installation. The LED version is equipped with a high-quality light-emitting diode and is available in the light colors neutral and warm white. A suitable constant current driver with 350mA is required to operate the FRAME BASIC. In addition to the built-in box and a flush-mounted frame, the optionally available accessories also include a connector strip for simplified wiring. This lamp contains built-in LED lamps. EEC: A - A++. The lamps cannot be replaced in the luminaire.