Energy management

This catalogue offers articles used for energy measurement or energy optimization in various bus systems, for example for radio bus system applications or the KNX bus system. KNX energy meters can be used for utility cost billing or cost monitoring, for cost center billing, energy optimization, visualization or installation monitoring. These KNX meters do not only capture and display consumption values, they also display other functions. They can be used to identify high consumption devices, to switch off specific channels if thresholds are exceeded or just to display the daily energy costs, voltage, current and power data. KNX visualization can generate a variety of display formats depending on time or load profile, can store your energy provider’s current prices and display accrued costs and compare them. For billing purposes, the meter should absolutely be calibrated and have MID approval. MID means Measuring Instruments Directive. The MID is a EU directive covering measuring instruments. Even in case of bus failure, the meters should continue to collect and store data. All KNX meters can be ordered as calibrated or uncalibrated type and with / without MID certificate. In Germany, for example, electricity meters used commercially must be calibrated. Therefore, check whether the meter intended for commercial application can be used in your country. After expiration of the calibration period (8 years for electronic meters, 12 years for mechanical transducer meters with induction system or 16 years for mechanical meters with induction system), the meter has to be replaced or the calibration period extended. Carefully study the features and parameters of the meters provided by different manufacturers to find the most suitable meter. There are different types of KNX meters, for example, direct meters or transformer meters for very high currents. In single-family houses or apartment buildings KNX direct meters are generally used. These are usually available up to 100A. In this eibabo category you will find, for example, radio single-phase meters, KNX energy meters, interface modules, energy measurement sensors, KNX power modules, KNX sensors, KNX meter interfaces, wireless energy sensors, KNX peak load limiters, bus electricity meters of the brands ABB, Busch-Jäger , Eaton, Eltako, Gira, Hager, Lingg & Janke, Merten and Siemens for various automation systems.

Manufacturer overview:

  • ABB
  • BTR NETCOM
  • Eaton
  • Eltako
  • Gira
  • Hager
  • Jung
  • KOSTAL SolarElectric
  • Lingg& Janke
  • Merten
  • Schneider Electric


 
This catalogue offers articles used for energy measurement or energy optimization in various bus systems, for example for radio bus system applications or the KNX bus system. KNX energy meters can... read more »
Close window
Energy management
This catalogue offers articles used for energy measurement or energy optimization in various bus systems, for example for radio bus system applications or the KNX bus system. KNX energy meters can be used for utility cost billing or cost monitoring, for cost center billing, energy optimization, visualization or installation monitoring. These KNX meters do not only capture and display consumption values, they also display other functions. They can be used to identify high consumption devices, to switch off specific channels if thresholds are exceeded or just to display the daily energy costs, voltage, current and power data. KNX visualization can generate a variety of display formats depending on time or load profile, can store your energy provider’s current prices and display accrued costs and compare them. For billing purposes, the meter should absolutely be calibrated and have MID approval. MID means Measuring Instruments Directive. The MID is a EU directive covering measuring instruments. Even in case of bus failure, the meters should continue to collect and store data. All KNX meters can be ordered as calibrated or uncalibrated type and with / without MID certificate. In Germany, for example, electricity meters used commercially must be calibrated. Therefore, check whether the meter intended for commercial application can be used in your country. After expiration of the calibration period (8 years for electronic meters, 12 years for mechanical transducer meters with induction system or 16 years for mechanical meters with induction system), the meter has to be replaced or the calibration period extended. Carefully study the features and parameters of the meters provided by different manufacturers to find the most suitable meter. There are different types of KNX meters, for example, direct meters or transformer meters for very high currents. In single-family houses or apartment buildings KNX direct meters are generally used. These are usually available up to 100A. In this eibabo category you will find, for example, radio single-phase meters, KNX energy meters, interface modules, energy measurement sensors, KNX power modules, KNX sensors, KNX meter interfaces, wireless energy sensors, KNX peak load limiters, bus electricity meters of the brands ABB, Busch-Jäger , Eaton, Eltako, Gira, Hager, Lingg & Janke, Merten and Siemens for various automation systems.

Manufacturer overview:

  • ABB
  • BTR NETCOM
  • Eaton
  • Eltako
  • Gira
  • Hager
  • Jung
  • KOSTAL SolarElectric
  • Lingg& Janke
  • Merten
  • Schneider Electric
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to

1 From 10
No results were found for the filter!
RECOMMENDED
3D
Hager - TE332 - Energy meter for KNX home automation TE332
£103.64 incl. VAT (£0.00)

*

Energy meter for KNX home automation TE332
Hager
TE332
RECOMMENDED
3D
ABB - ZS/S 1.1 - Energy meter for KNX home automation ZS/S 1.1
£84.87 incl. VAT (£0.00)

*

Energy meter for KNX home automation ZS/S 1.1
ABB
ZS/S 1.1
RECOMMENDED
3D
Hager - TE370 - Energy management for KNX home automation TE370
£211.90 incl. VAT (£0.00)

*

Energy management for KNX home automation TE370
Hager
TE370
RECOMMENDED
3D
Eltako - FWZ12-65A - Energy meter for radio home automation FWZ12-65A
£53.17 incl. VAT (£0.00)

*

Energy meter for radio home automation FWZ12-65A
Eltako
FWZ12-65A
RECOMMENDED
3D
Eaton - CEMU-01/03 - Energy management for bus system CEMU-01/03
£93.08 incl. VAT (£0.00)

*

Energy management for bus system CEMU-01/03
Eaton
CEMU-01/03
RECOMMENDED
3D
ABB - QA/S 3.16.1 - Energy management for KNX home automation QA/S 3.16.1
£302.32 incl. VAT (£0.00)

*

Energy management for KNX home automation QA/S 3.16.1
ABB
QA/S 3.16.1
RECOMMENDED
3D
ABB - EM/S3.16.1 - Energy management for KNX home automation EM/S3.16.1
£127.21 incl. VAT (£0.00)

*

Energy management for KNX home automation EM/S3.16.1
ABB
EM/S3.16.1
RECOMMENDED
3D
Hager - TE331 - Energy management for KNX home automation TE331
£89.51 incl. VAT (£0.00)

*

Energy management for KNX home automation TE331
Hager
TE331
RECOMMENDED
3D
Merten - MEG6600-0603 - EIB, KNX energy meter MEG6600-0603
£104.33 incl. VAT (£0.00)

*

EIB, KNX energy meter MEG6600-0603
Merten
MEG6600-0603
RECOMMENDED
3D
Eltako - FWZ14-65A - Energy meter for radio home automation FWZ14-65A
£39.55 incl. VAT (£0.00)

*

Energy meter for radio home automation FWZ14-65A
Eltako
FWZ14-65A
RECOMMENDED
3D
Eltako - FSS12-12V DC - Radio transmitter FSS12-12V DC
£55.56 incl. VAT (£0.00)

*

Radio transmitter FSS12-12V DC
Eltako
FSS12-12V DC
RECOMMENDED
3D
Eaton - CEMU-01/04 - Energy meter for bus system CEMU-01/04
£66.04 incl. VAT (£0.00)

*

Energy meter for bus system CEMU-01/04
Eaton
CEMU-01/04
1 From 10
Viewed from you