Air duct - Outdoor vane grate LWE 40 LFA S

Stiebel Eltron - LWE 40 LFA S - Air duct - Outdoor vane grate LWE 40 LFA S
Photo source: fig. possibly similar
LWE 40 LFA S 239608 4017212396087 EAN/GTIN DE 58834923 WEEE

£329.20 incl. VAT (£0.00)
£437.54 (-24.76% RRP***)

14-16 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
LWE 40 LFA S air duct Material other, front width 339mm, front height 518mm, The LWE 40 LFA S air... more
Air duct - Outdoor vane grate LWE 40 LFA S – Stiebel Eltron – 239608 – 4017212396087: LWE 40 LFA S air duct Material other, front width 339mm, front height 518mm, The LWE 40 LFA S air duct forms the end of the LWE 40 ventilation unit on the facade side for deflecting the air flow within the ETIC system. An internal sound insulation lining also improves the sound reduction index. The processing specifications of the ETIC system must be observed here. A variably adjustable plaster ring enables adaptation to different material thicknesses (approx. 3.2 - 5.6 cm) in front of the air duct. It is equipped with a window sill for controlled drainage of the condensate that occurs. The outer hood made of stainless steel, blank, forms a clean wall finish on the facade. For wall thicknesses including plaster from 40 cm. Notes: Observe the minimum coverage to the plaster according to the ETIC system specifications. The outer part of the telescopic housing must be permanently connected to the air duct in an airtight manner. We recommend the ventilation adhesive Turbo Flex Transparent from Reiß Kraft GmbH or equivalent. We recommend Siga Rissan or Knauf Insulation LDS Solitop tape or equivalent.
... more
Material other
front width 339 mm
front height 518 mm
With wire mesh no
With insect screen no
With pressure relief flap, blowing out no
With pressure relief flap, suction no
With counterrotating flap valve no
With equal rotating flap valve no
With mounting frame no
Lockable no
Motor controlled no
Colour other

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Air duct - Outdoor vane grate LWE 40 LFA S"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.