Screw-in heater - Universal flange for hot water tank BGC 2 6kW 480mm ET

Screw-in heater - Universal flange for hot water tank BGC 2 6kW 480mm ET – Stiebel Eltron – 232030 – 4017212320303: Screw-in heater BGC 2 6kW 480mm ET Connected load 2 ... 5.7kW, nominal voltage 1 230V, nominal voltage 2 400V, universal flange design, connection type screw connection, immersion depth 480mm, operating pressure 10bar, material of the heating element copper, temperature setting 10 ... 80°C, safety temperature limiter , Screw-in heaters for the SB, SBB, SBS and SBP free-standing storage tanks. Can also be used in heating systems in accordance with DIN 4751 and drinking water heating systems in accordance with DIN 4753 (observe immersion depth). Screw-in heater with enclosed extension G1 1/2 x 60 mm for screwing through the thermal insulation. Stepless temperature setting from approx. 10 degrees C to 80 degrees C (depending on the installation position), temperature limitation to 45/60/80 degrees C possible. Built-in temperature controller with safety temperature limiter (combination) with all-pole shutdown. Materials of heating element/protective tube: Cu. Screw-in connection: Cu Zn (brass) thread G 1 1/2 with PTFE seal. Permissible operating pressure 1.0 MPa. Quality and safety marks: VDE/GS mark, radio protection mark, IP44 (splash-proof).