Screw-in heater - Universal flange for hot water tank BGC/45

Screw-in heater - Universal flange for hot water tank BGC/45 – Stiebel Eltron – 075115 – 4017210751154: Screw-in heater BGC/45 Connected load 2 ... 5.7 kW, nominal voltage 1 230V, nominal voltage 2 400V, universal flange design, connection type screw connection, immersion depth 455mm, operating pressure 10bar, material of the heating element copper, temperature setting 10 ... 80°C, safety temperature limiter, screw-in heater for the storage tanks SB, SBB and SBP. Can also be used in heating systems in accordance with DIN 4751 and drinking water heating systems in accordance with DIN 4753 (observe immersion depth). Screw-in heater with enclosed extension G1 1/2 x 45 mm for screwing through the thermal insulation. Stepless temperature setting from approx. 10 degrees C to 80 degrees C (depending on the installation position), temperature limitation to 45/60/80 degrees C possible. Built-in temperature controller with safety temperature limiter (combination) with all-pole shutdown. Materials of heating element/protective tube: Cu. Screw-in connection: Cu Zn (brass) thread G 1 1/2 with PTFE seal. Permissible operating pressure 1.0 MPa. Quality and safety marks: VDE/GS mark, radio protection mark, IP44 (splash-proof).