Ceiling heating element 1000x500x26mm 1210W - Ceiling radiator 1210W VH10050

Ceiling heating element 1000x500x26mm 1210W - Ceiling radiator 1210W VH10050 – Vitramo – 4250939300597: Ceiling heating element 1000x500x26mm 1210W VH10050 version ceiling heater, voltage 220 ... 240V, number of heating stages 1, min. heating output 1210W, max. heating output 1210W, protection class (IP) IP00, height 500mm, width 1000mm, depth 26mm, ceiling infrared heating Series VH for surface mounting on the ceiling or suspended from cables. The design-oriented infrared ceiling heating element reaches a maximum surface temperature of 190° Celsius. In conjunction with the highly effective insulation on the back, this guarantees a very high degree of radiation efficiency with maximum infrared heat radiation to the front of the room. Radiation-oriented Vitramo ceiling heating elements heat sections of the room envelope in a differentiated manner so that there are no or only small temperature differences between them. Only when it comes into contact with the warm surfaces does the room air heat up evenly and with almost no flow. Vitramo recommends installing the infrared heater on the ceiling, as this achieves a proportion of radiation of up to 80%. The infrared heater is produced in a sandwich structure and consists of a toughened safety glass pane (ESG glass pane made of white glass, low in iron oxide, satinised, 5mm thick, standard surface color white similar to RAL 9010) which is covered on the back by a heating layer that converts electrical energy into heat. is heated. This layer is reinforced with glass fibers and embedded in a plastic mass. The back is effectively thermally insulated and completed by an aluminum cover that also encloses the sides. The weight of the VH10050 is 9.8 kg. For the mains connection, the heating elements are equipped with a plug on the device cover to match the connection socket supplied loose. Vitramo heating elements may only be installed by a professional. An additional room thermostat with weekly programming and open window detection and/or adaptive control of the start of heating and/or remote control option (outside the building) is required for operation as a fixed local space heater. The Vitramo room thermostat VTD-UP and those of the VTX series regulate Vitramo ceiling and wall heating elements in an ecodesign-compliant manner. Vitramo is a leading manufacturer of infrared heaters for wall and ceiling mounting and produces exclusively made in Germany at the Tauberbischofsheim site in Baden-Württemberg.