Ceiling heating element 618x618x26mm 810W VH06262

Ceiling heating element 618x618x26mm 810W VH06262 – Vitramo – 4250939300573: Ceiling heating element 618x618x26mm 810W VH06262 Version ceiling spotlight, voltage 220 ... 240V, number of heating levels 1, min. heating power 810W, max. heating power 810W, protection class (IP) IP00, height 618mm, width 618mm, depth 26mm, ceiling infrared heater VH series for surface mounting on the ceiling or suspended from cables. The design-oriented infrared ceiling heating element VH06262 is also the suitable grid ceiling heating for the suspended modular or grid ceiling (so-called Odenwald ceiling). The Vitramo VH06262 infrared heater is suitable for insertion into a system ceiling with an axis dimension of 625 mm. The usual dimensions of the system ceiling in Germany are 625 x 625 mm. Internationally, 600 x 600 mm is common. For insertion into these grid ceilings, Vitramo offers the heating element VH06060 (price and delivery time on request). The heating element is installed at a minimum distance of 180 cm from the floor. The load capacity of the ceiling construction must be checked beforehand. After removing a ceiling plate from the grid, installing the socket part for the power connection on the power cable and inserting the socket part into the heating element, the heating element can be inserted into the ceiling opening. The design-oriented infrared heating element reaches a maximum surface temperature of 190° Celsius. In conjunction with the highly effective insulation on the back, this guarantees a very high radiation efficiency with maximum infrared heat radiation towards the front of the room. Radiation-oriented Vitramo ceiling heating elements heat sections of the room's envelope surface in such a differentiated way that they have no or only small temperature differences between them. Only when it comes into contact with the warm surfaces does the room air heat up evenly and almost without any flow. Vitramo recommends installing the infrared heater on the ceiling, as this achieves a radiation level of up to 80%. The infrared heater is produced in a sandwich structure and consists of a single-pane safety glass pane (ESG glass pane made of white glass, low in iron oxide, satin finish, 5mm thick, standard surface color white similar to RAL 9010) which has a heating layer on the back that converts electrical energy into heat. is heated. This layer is embedded in a plastic material reinforced with glass fiber. The back is effectively thermally insulated and completed by an aluminum cover that also encloses the sides. The weight of the VH06262 is 7.6 kg. For the mains connection, the heating elements are equipped with a plug on the device cover to match the connection socket supplied loosely. Vitramo heating elements may only be installed by a specialist. To operate as a stationary individual room heater, an additional room thermostat with weekly programming and open window detection and/or adaptive control of the start of heating and/or remote control option (outside the building) is required. The Vitramo room thermostat VTD-UP and the VTX series regulate Vitramo ceiling and wall heating elements in an ecodesign-compliant manner. Vitramo is a leading manufacturer of infrared heaters for wall and ceiling installation and produces exclusively made in Germany at the Tauberbischofsheim location in Baden-Württemberg.