Interface RS-232 / RS-485 XTR - Fieldbus communication module 750-652/040-000

750-652/040-000 4050821460398 EAN/GTIN DE 40917098 WEEE

Our best price
£364.84 incl. VAT (£0.00)

14-16 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Interface RS-232 / RS-485 XTR 750-652/040-000 system component, degree of protection (IP) IP20,... more
Interface RS-232 / RS-485 XTR - Fieldbus communication module 750-652/040-000 – WAGO – 4050821460398: Interface RS-232 / RS-485 XTR 750-652/040-000 system component, degree of protection (IP) IP20, with electrical isolation, fieldbus connection possible via separate bus coupler, DIN rail mounting possible, explosion protection category for gas without, explosion protection category for dust without, Width 12mm, height 64mm, depth 100mm, The terminal with serial interface enables devices with RS-485, RS-422 or RS-232 interface (optional) to be connected to the WAGO-I/O-SYSTEM 750. With it gateways can also be implemented from the fieldbuses supported by the WAGO-I/O-SYSTEM 750 to a serial interface. The Bus Terminal does not support higher protocol levels. Communication is completely transparent to the associated fieldbus master. As a result, a wide range of applications for the terminal with serial interface is achieved. Any communication protocols that may be required can be flexibly programmed in the fieldbus master. The 2560 byte receive buffer enables the Bus Terminal to be used even at high transmission rates. At low data transmission rates, the received data can be evaluated in tasks with low priority without data loss. The 512-byte send buffer allows large, contiguous data to be sent quickly. The device is suitable for use under difficult environmental conditions: Greatly extended temperature range. Higher dielectric strength and EMC resistance. higher vibration resistance.
... more
Supply voltage at DC 24V
Voltage type of the supply voltage DC
Supports protocol for TCP / IP no
Supports protocol for PROFIBUS no
Supports protocol for CAN no
Supports protocol for INTERBUS no
Supports protocol for ASI no
Supports protocol for KNX no
Supports protocol for MODBUS no
Supports data highway protocol no
Supports protocol for DeviceNet no
Supports protocol for SUCONET no
Supports protocol for LON no
Supports protocol for SERCOS no
Supports protocol for PROFINET IO no
Supports protocol for PROFINET CBA no
Supports protocol for EtherNet / IP no
Supports protocol for DeviceNet Safety no
Supports protocol for INTERBUS safety no
Supports protocol for PROFIsafe no
Supports protocol for SafetyBUS p no
Wireless standard Bluetooth no
Wireless standard WLAN 802.11 no
Radio standard GPRS no
Radio standard eGPRS no
Radio standard GSM no
Radio standard LTE no
Radio standard UMTS no
IO-Link master no
System component yes
IP protection) IP20
With electrical isolation yes
Rail mounting possible yes
Wall / direct mounting possible no
Front installation possible no
Rack mounting possible no
Suitable for safety functions no
Associated equipment (Ex ia) no
Associated equipment (Ex ib) no
Width 12 mm
Height 100 mm
Depth 67.8 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Interface RS-232 / RS-485 XTR - Fieldbus communication module 750-652/040-000"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.