RTC module - Fieldbus function-/technology module 750-640

RTC module - Fieldbus function-/technology module 750-640 – WAGO – 4045454419417: RTC module 750-640 supply voltage at DC 24... 24V, voltage type of the supply voltage DC, number of HW interfaces Industrial Ethernet 0, number of interfaces PROFINET 0, number of HW interfaces serial RS-232 0, number of HW Interfaces serial RS-422 0, number of HW interfaces serial RS-485 0, number of HW interfaces serial TTY 0, number of HW interfaces parallel 0, number of HW interfaces wireless 0, number of HW interfaces USB 0 , number of HW interfaces other 0, supports protocol for other bus systems, system component, degree of protection (IP) IP20, fieldbus connection possible via separate bus coupler, DIN rail mounting possible, explosion protection category for gas ATEX gas explosion protection, cat. 3G, explosion protection Category for dust ATEX dust explosion protection, cat. 3D, width 12mm, height 64mm, depth 100mm, the RTC module provides the higher-level controller with the current time. The time is continued in the event of a power failure. If an external receiver is connected, the time signal from DCF77, WWVB or MSF can be used to set the clock. By default, the module is set to receive the DCF77 signal. The receiver for receiving the time signal can be supplied directly via the module. The connection of an external receiver is not absolutely necessary for the operation of the RTC module. The included timer function with 32 channels makes it easier for the controller to process time-controlled processes. The module counts the duty cycle of the 32 channels.