End clamp - Fieldbus power supply/segment module 750-627

End clamp - Fieldbus power supply/segment module 750-627 – WAGO – 4045454901264: End terminal 750-627 Supply voltage at DC 24... 24V Type of voltage of the supply voltage DC Number of HW interfaces Industrial Ethernet 0 Number of interfaces PROFINET 0 Number of HW interfaces serial RS-232 0 Number of HW interfaces serial RS-422 0, number of HW interfaces serial RS-485 0, number of HW interfaces serial TTY 0, number of HW interfaces parallel 0, number of HW interfaces wireless 0, number of HW interfaces USB 0, number of the HW interfaces others 1, supports protocol for other bus systems, system components, degree of protection (IP) IP20, design of the electrical connection spring-loaded connection, suitable as a segment module, fieldbus connection possible via separate bus coupler, DIN rail mounting possible, explosion protection category for gas without, explosion protection category for dust without, width 24mm, height 64mm, depth 100mm, The end terminal for terminal bus extension is plugged into the end of the bus terminal block. The block is terminated with the terminal and offers the possibility of connecting a connection cable with an RJ-45 connector. The electronics of the terminal are supplied via the K-bus. The terminal forms a functional unit together with at least one coupler terminal for terminal bus extension. The fieldbus coupler/controller takes care of all diagnostic and commissioning tasks.