KNX combination actuator KNX MSE 6M230 surface mounting - KNX combined I/O device 1002719

1002719 4251317201437 EAN/GTIN DE 22907310 WEEE

Our best price
£315.01 incl. VAT (£0.00)
£525.99 (-40.11% RRP***)

14-16 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
EIB/KNX combination actuator KNX MSE 6M230 AP 1002719 KNX bus system, other bus systems without,... more
KNX combination actuator KNX MSE 6M230 surface mounting - KNX combined I/O device 1002719 – Warema – 4251317201437: EIB/KNX combination actuator KNX MSE 6M230 AP 1002719 KNX bus system, other bus systems without, surface-mounted installation, with bus coupling, with LED display, on-site/manual operation, number of inputs 12, input voltage 36 ... 36V, suitable for C-load , number of output channels 8, max. number of switching outputs 12, max. number of shutter outputs 6, output power 500VA, rated current 3A, rated operating voltage 207 ... 253V, different phases can be connected, type of current AC, protection class (IP) IP30, multiple combination actuator for Control of 230 V AC sun protection drives and up to four lights with 12-fold binary input available on the KNX. The loads 6 sun protection drives 230 V AC, 5 sun protection drives 230 V AC and 2 x lighting or 4 sun protection drives 230 V AC and 4 x lighting can be connected. The device contains 12 binary inputs for blind buttons, light buttons or light switches. It has a separate supply voltage for sun protection and lighting. In addition, the fine-wire fuses for line protection and motor lines can be replaced. Parameters for different sun protection products are preset. Conventional WAREMA sun shading control centers can be connected to KNX. The product has a connection for a manual control unit MABE 12. The surface-mounted housing variant with strain relief is used for economical decentralized installation. The REG variant has a membrane keyboard for testing connected loads without prior KNX commissioning. LEDs indicate the switching status of the outputs. Configuration takes place in the ETS device parameter window. Parameterisable positions can be saved via telegram. Automatic switch-off with a configurable automatic return function (e.g. automatic sun function) is also included in the device. Byte value control for curtain length and slat angle is included. Status messages for curtain length, slat angle and light are also displayed. There are also preset basic parameters for sun protection products and standard functions for light control.
... more
Bus system KNX yes
Bus system KNX radio no
Bus system radio bus no
Bus system LON no
Bus system Powernet no
Other bus systems without
Remote control possible no
Ethernet no
Mounting Wall-mounted
With bus coupling yes
Activate LED no
With LED display yes
On-site / manual operation yes
Number of inputs 12
Max. Switching current 0A
Switching current ohmic 0A
Max. Switching capacity 0 VA
Input voltage 36 V
Suitable for C-load yes
Number of output channels 8th
Max. Number of switching outputs 12
Max. Number of blind outputs 6
Output 500 VA
Function switching no
Rated current 3 A
Rated operating voltage 207..253 V
External query voltage necessary no
Different phases connectable yes
Current Type AC
IP protection) IP30

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "KNX combination actuator KNX MSE 6M230 surface mounting - KNX combined I/O device 1002719"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.