Switch actuator KNX SA 4M230.8 AP - KNX combined I/O device 2014571

2014571 4251317203738 EAN/GTIN DE 22907310 WEEE

Our best price
£251.32 incl. VAT (£0.00)
£419.64 (-40.11% RRP***)

14-16 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Switch actuator KNX SA 4M230.8 AP 2014571 KNX bus system, other bus systems without,... more
Switch actuator KNX SA 4M230.8 AP - KNX combined I/O device 2014571 – Warema – 4251317203738: Switch actuator KNX SA 4M230.8 AP 2014571 KNX bus system, other bus systems without, surface-mounted installation, width in modular widths 9, with bus coupling, with LED display, on-site/manual operation, number of input channels 8, number of switching inputs 8, number of inputs 8, max. switching current 0.0015A, input voltage 207 ... 253V, suitable for C-load, number of output channels 4, max AC, degree of protection (IP) IP30, four sun protection drives with 230 V AC can be switched with the WAREMA KNX SA 4M230.8 sun protection actuator in the surface-mounted housing. Conventional (blind) buttons or window contacts, which are freely available on the bus, can be connected via 8 integrated binary inputs. Emergency/manual operation via Bluetooth for diagnosis and operation via a free smartphone app (can be deactivated via ETS). Easily replaceable fine-wire fuses ensure optimal cable protection for the connected components in the event of a short circuit. Preset basic parameters for the selection of blinds/external blinds, roller shutters/textile sun protection or window awnings with ZIP guidance. The three global security objects and one additional security object per output with different priorities and cyclic monitoring can be freely assigned and the reaction to security objects in the event of an alarm or after an alarm can be selected. With the actuator it is possible to switch on external automatic systems. For this purpose, the separation of manual and automatic input takes place at blind height and slat position. There is also the option of restricting manual operation using the automatic objects (cut off, etc.). Received telegrams can be saved and made up for during the automatic switch-off, and you can also define a status after the switch-off. The actuator has 8 scene objects per output. Status of hanging height, status of holding time, status of upper end position reached and slat angle can be sent or read out for each output. Creeping speed can be parameterized when starting the engine. It is possible to set correction times/delay time when approaching.
... more
Bus system KNX yes
Bus system KNX radio no
Bus system radio bus no
Bus system LON no
Bus system Powernet no
Other bus systems without
Remote control possible no
Ethernet no
Mounting Wall-mounted
Width in division units 9
With bus coupling yes
Activate LED no
With LED display yes
On-site / manual operation yes
Number of input channels 8th
Number of switching inputs 8th
Number of inputs 8th
Max. Switching current 0.0015 A
Switching current ohmic 0A
Max. Switching capacity 0 VA
Input voltage 207..253 V
Suitable for C-load yes
Number of output channels 4
Max. Number of blind outputs 4
Output 500 VA
Function switching no
Rated current 2.1A
Rated operating voltage 207..253 V
External query voltage necessary no
Different phases connectable no
Current Type AC
IP protection) IP30

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Switch actuator KNX SA 4M230.8 AP - KNX combined I/O device 2014571"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.