MSE compact 1 surface mounting - Electronic motor control device 1002764

1002764 4251317201222 EAN/GTIN DE 22907310 WEEE

Our best price
£66.66 incl. VAT (£0.00)
£83.92 (-20.57% RRP***)

3-5 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
MSE Compact 1 AP 1002764 Rated operational current Ie 0.01 ... 0.01A, rated operational voltage... more
MSE compact 1 surface mounting - Electronic motor control device 1002764 – Warema – 4251317201222: MSE Compact 1 AP 1002764 Rated operational current Ie 0.01 ... 0.01A, rated operational voltage Ue at AC 50 Hz 207 ... 253V, rated operational frequency 50 ... 50Hz, type of connection technology screw connection, rated control supply voltage Us at DC 30 ... 30V , type of voltage for actuation DC, number of outputs, contact-based 2, number of binary inputs 5, monostable switching function, design of electrical connection for auxiliary and control circuit screw connection, degree of protection (IP) IP30, motor control unit (MSE) for controlling a 230 V AC sun protection drive . A sun protection drive is controlled directly via the sun protection control unit or a button on site. In addition, you can combine several motor control units into a group and operate them together from one button. Furthermore, the logic behavior of the button can be switched between time and permanent logic. The timing logic causes the MSE to latch after the button has been pressed for approx. 2 seconds. Pressing the button for a short time generates a turning impulse (for slat products), whereby a permanent logic causes the MSE to be self-locking immediately when the button is pressed (for fabric products/roller shutters). The 24V DC control voltage is generated by an integrated power pack, which is required to control the MSE via the button or the sun protection control unit. The AP variant of this product has a locking input. The sun protection motor can be blocked via the locking input as soon as, for example, a window is open.
... more
Rated operational current Ie 0.01A
Rated operational voltage Ue at AC 60 Hz 0 V
Rated operational voltage Ue at DC 0 V
Rated operating frequency 50 Hz
Current detection module no
Voltage measuring module no
Type of connection technology Screw
Rated control supply voltage Us at DC 30 V
Voltage type for actuation DC
Number of outputs, contact-related 2
Number of digital inputs 5
Input for thermistor connection no
Input for earth fault detection no
Input for analogue temperature sensors no
Switching function monostable
Execution of the interface other
IP protection) IP30
Protection class (NEMA) other

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "MSE compact 1 surface mounting - Electronic motor control device 1002764"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.