Motor control unit MSE compact 2 AP - Electronic motor control device 2016482

Warema - 2016482 - Motor control unit MSE compact 2 AP - Electronic motor control device 2016482
Photo source: fig. possibly similar
Photo source: fig. possibly similar
2016482 4251317209297 EAN/GTIN DE 22907310 WEEE

Our best price
£122.83 incl. VAT (£0.00)
£150.52 (-18.4% RRP***)

14-16 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Motor control unit MSE compact 2 AP 2016482 Rated operational current Ie 0.016 ... 0.016A, rated... more
Motor control unit MSE compact 2 AP - Electronic motor control device 2016482 – Warema – 4251317209297: Motor control unit MSE compact 2 AP 2016482 Rated operational current Ie 0.016 ... 0.016A, rated operational voltage Ue at AC 50 Hz 207 ... 253V, rated operational frequency 50 ... 50Hz, type of connection technology screw connection, rated control supply voltage Us at DC 36 ... 36V, type of voltage for DC actuation, number of outputs, contact-based 4, number of binary inputs 6, monostable switching function, design of electrical connection for auxiliary and control circuit screw connection, degree of protection (IP) IP30, motor control unit (MSE) for controlling up to two 230 V AC sun shading drives . There is a direct control of up to two 230 V sun protection drives via a sun protection control center and a button on site. In addition, you can combine several motor control units into a group and operate them together from one button. The logic behavior of the button can be switched between time and permanent logic. The timing logic causes the MSE to latch after the button has been pressed for approx. 2 seconds. Pressing the button for a short time generates a turning impulse (for slat products). A permanent logic causes the MSE to latch as soon as the button is pressed (for fabric products/roller shutters). The 24V DC control voltage is generated by an integrated power pack, which is required to control the MSE via the button or the sun protection control unit.
... more
Rated operational current Ie 0.016 A
Rated operational voltage Ue at AC 60 Hz 0 V
Rated operational voltage Ue at DC 0 V
Rated operating frequency 50 Hz
Current detection module no
Voltage measuring module no
Type of connection technology Screw
Rated control supply voltage Us at DC 36 V
Voltage type for actuation DC
Number of outputs, contact-related 4
Number of digital inputs 6
Input for thermistor connection no
Input for earth fault detection no
Input for analogue temperature sensors no
Switching function monostable
Execution of the interface other
IP protection) IP30
Protection class (NEMA) other

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Motor control unit MSE compact 2 AP - Electronic motor control device 2016482"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.