Wall duct WMD-26/10 7000063503

3M - 7000063503 - Wall duct WMD-26/10 7000063503
Photo source: fig. possibly similar
Photo source: fig. possibly similar
7000063503 2000002014430 EAN/GTIN DE 36963167 WEEE

Our best price
£30.34 incl. VAT (£0.00)

3-5 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
The 3MT heat-shrink WMD wall bushings are used to seal telecommunications and power cables in... more
Wall duct WMD-26/10 7000063503 – 3M – 2000002014430: The 3MT heat-shrink WMD wall bushings are used to seal telecommunications and power cables in wall bushings. It enables the gas and watertight introduction of cables and pipes into the building. The cables or pipes can also be pulled in at a later point in time and installation as a reserve bushing is also possible. The wavy surface of the wall duct is coated with a special sealing material. This allows you to achieve a permanently watertight seal when closing the breakthrough opening with mortar or cement. The scope of delivery consists of a polyolefin shrink tube shrunk onto a support coil, a cable cleaning cloth and the assembly instructions.
... more

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Wall duct WMD-26/10 7000063503"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.