Ammeter 200A/60mV - Measuring scale 0...200 Ampere SCL-A2-200/96

ABB - SCL-A2-200/96 - Ammeter 200A/60mV - Measuring scale 0...200 Ampere SCL-A2-200/96
Photo source: fig. possibly similar
Photo source: fig. possibly similar
SCL-A2-200/96 2CSG233229R5011 8012542598404 EAN/GTIN DE 91945327 WEEE

£3.39 incl. VAT (£0.00)
£5.82 (-41.75% RRP***)

14-16 days* (GBR)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Measuring scale 0...200 Ampere Unit of measurement Ampere, Initial value scale 0, Nominal end... more
Ammeter 200A/60mV - Measuring scale 0...200 Ampere SCL-A2-200/96 – ABB – 2CSG233229R5011 – 8012542598404: Measuring scale 0...200 Ampere Unit of measurement Ampere, Initial value scale 0, Nominal end value of the scale 200, Width meter scale 96mm, Height meter scale 96mm, Max. needle deflection 90°, Mounting method Other
... more
Unit of measurement other
Nominal final value of the scale 200
Overcurrent scale no
Width of the measuring scale 96 mm
Height of the measuring scale 96 mm
Max. Pointer deflection 90°
Mounting other

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Ammeter 200A/60mV - Measuring scale 0...200 Ampere SCL-A2-200/96"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.