Analog input terminal 4-channel 0-10VDC - Fieldbus analogue module 2 In / 0 Out EL3162

Analog input terminal 4-channel 0-10VDC - Fieldbus analogue module 2 In / 0 Out EL3162 – Beckhoff: Analog input terminal 4-channel 0-10VDC EL3162 supply voltage at DC 24 ... 24V, voltage type of the supply voltage DC, input, voltage, resolution of the analog inputs 16 bit, number of analog inputs 2, number of analog outputs 0, number of HW interfaces Industrial Ethernet 0, number of PROFINET interfaces 0, number of HW interfaces serial RS-232 0, number of HW interfaces serial RS-422 0, number of HW interfaces serial RS-485 0, number of HW interfaces serial TTY 0, number of HW interfaces in parallel 0, number of HW interfaces wireless 0, number of HW interfaces other 1, supports protocol for other bus systems, system component, protection class (IP) IP20, design of the electrical connection spring-loaded connection, fieldbus connection via separate bus coupler possible, mounting rail mounting possible, explosion protection category for gas without, explosion protection category for dust without, width 12mm, height 100mm, depth 68mm, The analog input terminal has the task of supplying measuring transducers located in the field and transmitting analog measuring signals to the automation device in a galvanically isolated manner . The supply voltage for the sensors is routed to the terminal via the power contacts. The power contacts can be supplied either via the standard supply or a power supply terminal (EL9xxx) with galvanic isolation for the operating voltage. The input electronics are independent of the supply voltage of the power contacts. The reference potential for the inputs is the 0 V power contact. The EtherCAT Terminal displays its signal status using LEDs. The error LEDs signal overload and wire breakage