Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).

show less

Fieldbus analogue module 2 In / 0 Out Voltage type of supply voltage DC, Input, voltage,... more

Close menu

Bus terminal - Fieldbus analogue module 2 In / 0 Out KL3062 – Beckhoff: Fieldbus analogue module 2 In / 0 Out Voltage type of supply voltage DC, Input, voltage, Resolution of the analogue inputs 12Bit, Number of analogue inputs 2, Number of analogue outputs 0, Number of HW-interfaces industrial Ethernet 0, Number of interfaces PROFINET 0, Number of HW-interfaces RS-232 0, Number of HW-interfaces RS-422 0, Number of HW-interfaces RS-485 0, Number of HW-interfaces serial TTY 0, Number of HW-interfaces parallel 0, Number of HW-interfaces Wireless 0, Number of HW-interfaces other 0, System accessory, Degree of protection (IP) IP20, Type of electric connection Spring clamp connection, Rail mounting possible, Explosion safety category for gas None, Explosion safety category for dust None, Width 12mm, Height 100mm, Depth 68mm

... more

Close menu

Voltage type of the supply voltage	DC
Entrance, electricity	no
Input, voltage	yes
Entrance, resistance	no
Entrance, resistance thermometer	no
Input, thermocouple	no
Input signal configurable	no
Resolution of the analog inputs	12 bits
Output, electricity	no
Output, voltage	no
Output signal configurable	no
Number of analog inputs	2
Analog inputs configurable	no
Analog outputs configurable	no
Supports protocol for TCP / IP	no
Supports protocol for PROFIBUS	no
Supports protocol for CAN	no
Supports protocol for INTERBUS	no
Supports protocol for ASI	no
Supports protocol for KNX	no
Supports protocol for MODBUS	no
Supports data highway protocol	no
Supports protocol for DeviceNet	no
Supports protocol for SUCONET	no
Supports protocol for LON	no
Supports protocol for PROFINET IO	no
Supports protocol for PROFINET CBA	no
Supports protocol for SERCOS	no
Supports protocol for EtherNet / IP	no
Supports protocol for DeviceNet Safety	no
Supports protocol for INTERBUS safety	no
Supports protocol for PROFIsafe	no
Supports protocol for SafetyBUS p	no
Wireless standard Bluetooth	no
Wireless standard WLAN 802.11	no
Radio standard GPRS	no
Radio standard GSM	no
Radio standard UMTS	no
IO-Link master	no
System component	yes
IP protection)	IP20
Rail mounting possible	yes
Wall / direct mounting possible	no
Front installation possible	no
Rack mounting possible	no
Suitable for safety functions	no
Associated equipment (Ex ia)	no
Associated equipment (Ex ib)	no
Explosion protection category for gas	without
Explosion protection category for dust	without
Width	12 mm
Height	100 mm
Depth	68 mm

To inquiry form

Close menu

Read, write and discuss reviews... more

Close menu

Customer review for "Bus terminal - Fieldbus analogue module 2 In / 0 Out KL3062"

Write a review

Evaluations will be activated after verification.

Bus terminal - Fieldbus analogue module 2 In / 0 Out KL3062

Description

Technical specifications

Inquiry

Description

Technical specifications

Inquiry

Frequently bought

Frequently bought

Useful

Useful

Interesting

Interesting

Customers also bought

Customers also bought

Customers also viewed

Customers also viewed

Viewed from you

Viewed from you

Rate item

Rate item